| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-04-2000, 06:51 AM
|
|||
|
|||
I currently have 15 by 6 inch rallys on my 66 GTO.I would like to put some crager mags on in a 15 by 7 inch wheel...will these fit ok?
------------------ rjcarleton
__________________
rjcarleton |
|
#2
04-04-2000, 06:51 AM
|
|||
|
|||
|
I currently have 15 by 6 inch rallys on my 66 GTO.I would like to put some crager mags on in a 15 by 7 inch wheel...will these fit ok?
------------------ rjcarleton
__________________
rjcarleton |
|
#3
04-04-2000, 01:42 PM
|
|||
|
|||
|
As long as you have the drum brakes, they will fit fine (if you notice, the repro Rally I's they sell are 14x7, 14x8, 15x7 and 15x8) They don't even make the 6" one. Been told that if you go to the 15 x8's your wheel clearance gets a little tight, but the 7" is great. By the way, if you want to keep the same axle height with the 15" that the original setup had, the diameter of the original wheels were 27.2 inches. Just check the web (Coker and Yokahama both have good sites) and look for a 15 inch with the same OD (think they are about 65 series).
Ed |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
