The ground cable should be connected to a ground rod via a bolt connector or sometimes hot weld( called Cad weld). It really should be accessible at the rod connection point and verified as being firmly connected as this is the primary ground for your electrical service. Homes built before 1978( I believe) only had to have one a single ground.
Can you take a picture?
Quote:
Originally Posted by gtorich
Didnt get a chance to measure them, starting raining and i called it a day............at best 36 inches.
Another question for you guys, dont have a good pic as of now, but seems like i have a "ground cable" about 2 foot from the house...
...does this have to be moved or can I cement over that.
Rich
|
07-01-2020, 03:50 PM
Threaded Mode