FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
*** WANTED 69 Firebird 10 bolt Posi ***
looking for a 1969 Firebird 10 bolt (8.5) posi rear preffer mid 3 gears, would also like something close to new jersey but may consider shipped rear.
your help is greatly appreciated maybe contacted at ddmrk@aol.com |
#2
|
||||
|
||||
***** UPDATE on wanted POSI REAR *****
looking for a 69 Firebird 8.2 10 bolt posi rear preffer 3.36 or 3.42, would also like something close to new jersey but may consider shipped rear. your help is greatly appreciated maybe contacted at ddmrk@aol.com |
#3
|
|||
|
|||
I asked about the rear end you're looking for on another site I belong to. If I get any replies I'll let you know.
Good luck, NYH1!
__________________
'78 Camaro, mild Vortec Head SBC 385 stroker motor, 9.1 comp. ratio, Lunati Voodoo 262/268 hyd. flat tap. cam, RPM intake, 650 AVS carb, TH350 w/Coan 11" 2600 stall, 8.5" 10 bolt w/3.42's and a Duragrip, 1 5/8" full length Hedmen Headers, 2 1/2" full length Flowmaster dual exhaust W/ transverse flow muffler. Gonna be a daily driver/mild street performance car!
Some sort of Poncho next. |
#4
|
||||
|
||||
Danny,
I've got a 1971 Firebird 10-bolt non posi still in a parts car. I know its not exactly what your looking for but I'm not far. If your interested let me know. If not, no harm, no foul. |
#5
|
||||
|
||||
thanks for the offer but need a 69 rear and also need a posi
|
#6
|
|||
|
|||
Isn't the '71 rear end a little wider then the '69 rear end?
__________________
'78 Camaro, mild Vortec Head SBC 385 stroker motor, 9.1 comp. ratio, Lunati Voodoo 262/268 hyd. flat tap. cam, RPM intake, 650 AVS carb, TH350 w/Coan 11" 2600 stall, 8.5" 10 bolt w/3.42's and a Duragrip, 1 5/8" full length Hedmen Headers, 2 1/2" full length Flowmaster dual exhaust W/ transverse flow muffler. Gonna be a daily driver/mild street performance car!
Some sort of Poncho next. |
#7
|
||||
|
||||
I may be taking the rear out of my 69 bird this winter. It was rebuilt 3 years ago and has maybe 10000 mi on it. It is a 3.90:1 ratio. However it is a 67 rear, do you need a 1969 rear or just one to fit a 69?
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
#8
|
||||
|
||||
after taking a good look at my rear and the condition of it and the 3:23 gear that is in it I am just going to add a posi unit to it so my need have changed to just needing a 8.2 posi unit
|
#9
|
||||
|
||||
No problem, don't have one of those.
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
#10
|
||||
|
||||
Width question
I replaced a 69 non-posi 8.2 with a 79 or so corporate 8.5. The perches are different, but the axle width was identical. I would assume the 71 is the same.
The driveshaft will have to be cut down about 1 1/2 inches, too. Bill
__________________
'69 'Bird 'vert. An all Pontiac T/A lookalike and a work in process. 99% done Bill Jacobs |
Reply |
|
|