[Bob with the 66]

Anyone have a 66 A-Body without the blower cover on it so they could help with some rough dimensions. Mine is already covered and sealed up so your help would be greatly appreciated.


The picture shows the three measurements I'm looking for marked "A", "B", and "C".


Thank you in advance, Bob

[ftwmlp]

Originally Posted by Bob with the 66

Anyone have a 66 A-Body without the blower cover on it so they could help with some rough dimensions. Mine is already covered and sealed up so your help would be greatly appreciated.


The picture shows the three measurements I'm looking for marked "A", "B", and "C".


Thank you in advance, Bob

These should be considered very rough since I have installed the rubber hose grommet for a Vintage Air install in place of the blower and had to do some dressing up of the circle from the previous owners work:

A = 6"
B = 1.5"
C = 2"

Hope that helps some.

Mike Pearson

[Bob with the 66]

Thanks Mike, That is what I was looking for!

Originally Posted by ftwmlp

These should be considered very rough since I have installed the rubber hose grommet for a Vintage Air install in place of the blower and had to do some dressing up of the circle from the previous owners work:

A = 6"
B = 1.5"
C = 2"

Hope that helps some.

Mike Pearson