FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Comp Cams #995 Valve Springs
used Comp Cams #995 Valve Springs, for Pontiac D-port heads (checked OK at 95 lbs. @ 1.70" installed height), dual springs with outer, inner & dampner, set of 16 $25 plus shipping
|
#2
|
|||
|
|||
Did you have to do any work on the heads to fit these springs?
|
#3
|
|||
|
|||
[QUOTE=CatalinaMike;6111061]Did you have to do any work on the heads to fit these springs?[/QUOTE
No work needed...they are the same diameter and height as stock valve springs. They were installed on '68 400 #62 heads with no problems. |
#4
|
|||
|
|||
Comp Cams 995 valve springs
Still Available...$35 shipped lower 48
|
#5
|
||||
|
||||
I believe I’ll take these. I’ll PM you.
|
#6
|
|||
|
|||
Just FYI, stock install height is a little less then 1.6...
Comp has a tool to cut the seat if you want to go that route. I used these on my 6x-8, but installed the earlier valves making install height closer to 1.7. Sent from my iPhone using Tapatalk
__________________
1979 Firebird Trans Am 301/4spd (Now 428) 1977 Firebird Formula 400/Auto 2007 Grand Prix GXP 5.3L |
#7
|
|||
|
|||
CompCams 995 valve springs
SALE PENDING!
|
#8
|
|||
|
|||
Sale pending to...........?
|
#9
|
|||
|
|||
Comp Cams 995 valve springs
SOLD!
|
Thread Tools | |
Display Modes | |
|
|