FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
62 GP 389 plug wire routing drivers side Picture?
Anyone have a picture of 62 GP drivers side plug wire routing? I have a metal post loom thing that bolts somewhere on the intake (it was off when I bought the car) but I’m not exactly sure how it’s turned). I think I know the bolt hole it goes in. Thanks Jim
|
#2
|
||||
|
||||
I’m talking about the factory vertical metal spark plug wire loom that bolts to the intake. I think I see the hole but how is it turned. Thanks
|
#3
|
||||
|
||||
What do you mean by "turned"? I thought the ones I had seen were hex rod threaded on each end. Turning with a wrench should be easy.
|
#4
|
||||
|
||||
This is a picture of the engine in my '61, I think the looms are the same as 1962 (sorry the picture isn't very large.)
|
#5
|
||||
|
||||
The is of Paul Glascos '62 Catalina and GP would be the same.
|
#6
|
||||
|
||||
This is the loom that I’m asking about. I think it’s purpose is to elevate the plug wires above the mechanical carb linkage. I’m not sure where it was mounted and how it was turned. Does the bottom L mount with the L toward the firewall or toward the passenger fender? Yhank
|
#7
|
||||
|
||||
It mounts like what is shown in the picture 61-63 posted.
|
#8
|
||||
|
||||
Thanks.! Thanks for the pic 61-63!
|
Reply |
Thread Tools | |
Display Modes | |
|
|