FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1964 Grand Prix throttle/kickdown detente bushing!?!?!?
Does any one here know what this is actually called and where I can find a new one for a customer? Obviously it’s a bushing just need to know what and where to order. Car is a 1964 GP with 389. Thanks in advance
|
#2
|
||||
|
||||
Hi, a long time ago I bought a bunch of little (NOS) parts from a Chevrolet/ Pontiac dealership.
Can you give me the ID and the OD and the approximate side-to-side width of the bushing you need?
__________________
Peter Serio Owner, Precision Pontiac |
#3
|
|||
|
|||
What size hole? Is the bushing rubber? some have another nylon bushing in the existing rubber bushing.Photo further away might be helpful
|
#4
|
|||
|
|||
bushing
Must have found what you were looking for.
|
#5
|
||||
|
||||
I'm sure there are many big Pontiac guys who need or will need this bushing. I wonder if there is an off-the-shelf rubber grommet that would fit this application.
The original poster has left the building!!
__________________
BONESTOCK GOATS '64 GTO Tripower Hardtop (Wife's Car) '64 GTO Tripower Post Coupe (My Car) '99 Bonneville SE Sedan |
#6
|
|||
|
|||
Sorry guys, not my normal hangout, usually the trans am section. This is for a customer. Unfortunately his 57 Star Chief blew up and he had to switch to the Grand Prix while we rebuild his 57 so that’s on hold and we can’t disassemble his only running car to figure out inner and outer diameter. As soon as I can I will do so and report back as he still desperately needs it.
Sent from my iPhone using Tapatalk |
Reply |
|
|