[Stan Weiss]

Originally Posted by GTOGEORGE

Yep that’s it, it was a sh_tty run, spun the tires and didn’t pull top end......I was surprised it ran a decent!



GTO George

George,
What size is your engine?

Thanks,
Stan

[GTOGEORGE]

Originally Posted by Stan Weiss

George,
What size is your engine?

Thanks,
Stan

389........!



GTO George

[GTOGEORGE]

OK............JK.......525!


GTO George

[Stan Weiss]

I have added Ray Cox to the list

Does anyone have information on Ed McGuinn?

Thanks,
Stan

[Jack Ferris]

Originally Posted by Stan Weiss

I have added Ray Cox to the list

Does anyone have information on Ed McGuinn?

Thanks,
Stan

His engine is for sale on the Facebook.

[Stan Weiss]

OK I have added a new column to the list Top mph. If you are on the list or know of someones top mph being higher than their best et mph please let me know.

http://www.magneticlynx.com/carfor/pont_list.htm

Thanks
Stan

[johnta1]

Stan, the fastest Pontiacs website has a lot of the ET slips of those runs:


Fastest Pontiacs


They have the 1/8th time/mph on them usually.


Joe Perkins:







Bill Mellott:

[Stan Weiss]

Thanks John,

Stan

[Stan Weiss]

With the racing season just about at its end for this year. I am looking to finalize the list until next racing season. So if you see anything that needs updating please let me know.

http://www.magneticlynx.com/carfor/pont_list.htm

Thanks,
Stan

[John Langer]

4.833@145.44 1/8 mile on my .54 pass.

[Stan Weiss]

Originally Posted by John Langer

4.833@145.44 1/8 mile on my .54 pass.

John,
Thank you

Stan

[cgeise]

not trying to start anything -- but 6.66 at 183 just sounds "off" to me ---

[GTOGEORGE]

Originally Posted by cgeise

not trying to start anything -- but 6.66 at 183 just sounds "off" to me ---

If I remember correctly he got out of shape and lifted.


GTO George

[Mark G]

Originally Posted by GTOGEORGE

If I remember correctly he got out of shape and lifted.


GTO George

You are right he lifted @ the 1000ft mark..

[Stan Weiss]

Originally Posted by cgeise

not trying to start anything -- but 6.66 at 183 just sounds "off" to me ---

Curt,
Did you click on the link and watch the video of the run?

Stan

[Stan Weiss]

I know nothing about Bill's car and engine. So this is a WAG for HP and torque curve, weight, aerodynamics, etc. and when he lifted.

Stan


___________________________________Force____Aero__ ___Rolling__Elapsed___________Accele
__RPM______MPH___Velocity__Motor_____@_____dynamic ___Resist.___Time______Total__ration
__________________ft/sec__Torque___Wheel__Drag_-_HP____HP______(ET)____Distance_in_G's

_5428.8__139.26__204.250__1847.3__3737.6___162.094 ___14.929___2.9388___344.386___1.442
_5450.0__139.81__205.050__1846.6__3736.2___164.005 ___14.987___2.9561___347.918___1.437

_7450.0__191.11__280.297__1557.4__3151.0___418.925 ___20.487___5.0224___856.053____.864
_7550.0__193.68__284.060__1523.6__3082.5___436.022 ___20.762___5.1604___894.987____.831
_7601.8__195.00__286.007__1504.1__3043.2___445.049 ___20.904___5.2340___915.986____.812
_7625.0__195.60__286.881__1495.4__3025.6___449.145 ___20.968___5.2677___925.627____.804
60_Foot_ET___=_1.1051
330_Foot_ET__=_2.8677
1/8_Mile_ET__=_4.2951
1/8_Mile_MPH_=_173.2703

-------_Calculated_From_Constant_Velocity
1000_Foot_ET_=_5.5269
1/4_Mile_ET__=_6.6424
1/4_Mile_MPH_=_195.6009

-------_Calculated_From_DeAcceleration
___________________________________Force____Aero__ ___Rolling__Elapsed___________Accele
__RPM______MPH___Velocity__Motor_____@_____dynamic ___Resist.___Time______Total__ration
__________________ft/sec__Torque___Wheel__Drag_-_HP____HP______(ET)____Distance_in_G's

_________195.35__286.515___________________447.426 ___20.942___5.2970___934.027___-.389
_________195.10__286.148___________________445.710 ___20.915___5.3264___942.437___-.388

_________184.23__270.198___________________375.255 ___19.749___6.6804__1318.882___-.346
_________184.20__270.161___________________375.102 ___19.746___6.6837__1319.772___-.346
_________184.18__270.125___________________374.950 ___19.744___6.6870__1320.663___-.346
1000_Foot_ET_=_5.5341
1/4_Mile_ET__=_6.6870
1/4_Mile_MPH_=_184.1759

[S/st 54]

Stan I have a update for your list
Shane Molinari went 7.224@188.10 at the Vegas divisional.

I think Shane uses a lot of KRE stuff on his 68 Lemans I'm not exactly sure on the details.

https://www.dragracecentral.com/DRCS...58857#indextop


And Bill Krech went 7.155@193.82 at the divisional in Earlville Iowa back in 2012.

https://www.dragracecentral.com/DRCStory.asp?ID=258336

Kerch uses a lot of stuff from Butler and thy combo did have eheads on it.

[Mean Green]

Originally Posted by Jack Ferris

His engine is for sale on the Facebook.

Link to the engine for sale?

I'm not good at getting around on Facebook.

[Stan Weiss]

Originally Posted by S/st 54

Stan I have a update for your list
Shane Molinari went 7.224@188.10 at the Vegas divisional.

I think Shane uses a lot of KRE stuff on his 68 Lemans I'm not exactly sure on the details.

https://www.dragracecentral.com/DRCS...58857#indextop


And Bill Krech went 7.155@193.82 at the divisional in Earlville Iowa back in 2012.

https://www.dragracecentral.com/DRCStory.asp?ID=258336

Kerch uses a lot of stuff from Butler and thy combo did have eheads on it.

Jason,
Thank you for the information.

Stan

[S/st 54]

No problem Stan. I think it's pretty cool your doing that list.