FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#101
|
||||
|
||||
I got a complete wood kit from autowood.net to replace all of the original wood in the body. I told them the amount I was chopping the roof and they made the wood to match that dimension. What you see in the photo is the new wood.
|
#102
|
||||
|
||||
I hope you are going to add a lot of steel reinforcement along with the wood. I thought about saving the wood in mine but after talking with a friend who did a 31 Chevy I decided I didn't want to have his nitemare with wood he bit a similar car to mine with a healthy v8 replaced all the wood with new wood and no extra steel.hr drove it a lot for a couple years the started to notice that all the body panels were getting loose his final wood problem came after a day at the strip when the wood across the top of the door opening cracked and the top sagged causing the doors not to close anymore. I think the wood is fine in a stock resto but once you add in modern drivetrain and suspension it causes a lot of problems as the original car only had 60 hp. I priced the wood kit and was able to go all steel with labor for about 1/4 the cost of just the wood the only wood I left was in the doors and around the trunk and they both had some steel structure added
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#103
|
||||
|
||||
Had the body stripped yesterday with the dustless blasting method came out better than I had hoped basically no body damage and only a couple pinholes to fix. It only took them an 1 1/2 to do everything. Dropped it at the painters to get it primed
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#104
|
||||
|
||||
All in prime
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#105
|
||||
|
||||
Frame is together should have engine and trans in next weekend
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#106
|
||||
|
||||
Talk about a clean body Daaaaaaanng!!!!!!!!!!!!!!!!!!!!!!!!
GT. |
#107
|
||||
|
||||
Dropped the drivetrain in the frame today
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#108
|
||||
|
||||
Lookin' really good!
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) |
#109
|
||||
|
||||
INDEED.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#110
|
||||
|
||||
This is going to be so cool when finished!
__________________
DragStarLeMans |
#111
|
||||
|
||||
Made a grill insert last nite out of stainless lock crimp mesh I was afraid it would unravel as I cut it but it held together fine looks just like the original material
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#112
|
||||
|
||||
good day today got the trunk and interior floor primed and the underside primed and put on the bedliner
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#113
|
||||
|
||||
Nothing is easy if your not working on a ford example rear view mirror on a ford you just lamp it onto the door frame on the pontiac the frame does not have an edge to clamp to so an hour later after drilling through the door then countersinking a hole in the outer skin now I have a clean mounted mirror. It might need an extension and a larger head but I am very happy with it
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#114
|
||||
|
||||
Headers and pipes came back from jet hot today very happy
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#115
|
||||
|
||||
They look great!
__________________
Tod Hoffmann 1966 GTO Montero Red Hardtop - Holley EFI'd 462, KRE DPorts/Muncie 4spd 1990 Chevy 454SS pickup - Accel DFI/T56 6spd - Hot Rod Power Tour Long Hauler 1996 Chevy K2500 ECSB 'Poopy' 2002 Honda VTX1800C 2016 Cadillac CTS Premium My project thread: http://forums.maxperformanceinc.com/...d.php?t=516826 |
#116
|
||||
|
||||
Still waiting for paint so today I thought I would test fit the sliding ragtop
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#117
|
||||
|
||||
Pic
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#118
|
||||
|
||||
Before I forget it- Thanks very much for building such a great rod out of a '31 Pontiac!!.
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) |
#119
|
||||
|
||||
Dropped the body at the painters this morning
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#120
|
||||
|
||||
Can't wait to see it!
|
Reply |
|
|