Go Back   PY Online Forums - Bringing the Pontiac Hobby Together > PY Welcomes 2008-09 G8 owners > G8 Exterior Tech

G8 Exterior Tech hoods, spoilers, carbon fiber trim, etc

Thread Tools Display Modes
Old 02-06-2014, 02:18 PM
glanzergtx glanzergtx is offline
Junior Member
Join Date: Feb 2014
Location: Sioux Falls, SD
Posts: 3
Default Holden/Euro Spoiler

Figured i would help a few people out. Some are the edge of buying this spoiler and not sure how the installation is. This is what i put together so hope it helps.

Since 5 holes have to filled on the trunk lid itself i purchased another trunk lid for this reason. I stripped it down and removed the stock g8 spoiler "which was a pain in the a$$".

You can get the spoiler here.

Parts from PFYC

After spoiler is removed you will find these holes that will need to be filled in.

2 new holes will need to be drilled 1 on each side. I used a 5/16" drill bit and drilled out the existing hole to help with bolt alignment.

On the bottom side of the trunk lid you will see a hole that was filled originally.

New bolts in with spoiler

Test fit and tighten down.

After complete

The Holden/Euro Spoiler from PFYC.

2009 Pontiac G8 GT

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 07:13 AM.

Featured Vendors

Advertising Info