FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Pontiac Valley Pans: any value?
Again I have moved to a new house and trying to streamline the parts pile. I have 4 very nice and cleaned valley pans from 65 and newer style Pontiac engines. I have had them, long before these started being reproduced. They were acid dipped and primed if I recall correctly.
Is there any value to them, or just put them in the scrap gondola? Thanks in advance for any comments....
__________________
...Steve T. "Resurrection of a 1970 Trans Am" Blog www.455hota.wordpress.com ------------------------------------- 1966 GTO 4 speed Hardtop Alabama car (Marina Turquoise w turquoise interior) 1970 TA 4 speed Canadian car (Lucerne Blue w bright blue interior) |
#2
|
||||
|
||||
I'm sure someone can use them. Original valley pan fit right.
Sent from my Moto Z3 Play using Tapatalk
__________________
You never know what I might have that you are looking for. EMAIL me. Also check out my other ads here on PY. Just click on user name to view other ads. USPS Money Orders or Wal-Mart to Wal-Mart money gram wire transfer -preferred payments. If Payment doesn't show up in 3-4 days, I move on to the next person that wants it. Serious Inquiries Only - Shipping Isn't Free. |
#3
|
|||
|
|||
As you know the big issue with them is getting them super clean inside and out, especially inside. If they were hot tanked first then acid soaked to remove the rust, they could be fine inside. Most people would want to cut out the spot welds, clean them out 100% and weld them back together. Before reproductions, that's what we did to insure they were 100% clean. Some people really prefer OE parts rather than some of the marginal reproductions, so IMO, they have some value. I would say $30-40 each would be a typical price for what you have. If I wanted to use one, I would look all over inside with one of the little cameras available before I cut it apart. It could be fine. Just hate to see OE parts thrown away.
|
#4
|
|||
|
|||
70 is the best one, it is the one the Tomahawk pan was made from. Clears roller lifters.
|
#5
|
|||
|
|||
I would not trust any old pan that has not been taken apart and really cleaned.Just not worth it IMO.Tom
|
#6
|
||||
|
||||
Don't throw them out. I recently bought a used one and a quick look with a bore camera is a good idea.
__________________
|
#7
|
|||
|
|||
Its not hard to grind the welds off, separate, clean and tack weld back together. That is what I did with my 70 pan, solid roller lifters.
You can buy one of those little hole punch drill bits for a cleaner look removing the tack welds, but its on the inside of the engine anyway. |
#8
|
||||
|
||||
Thanks for all the feedback. I will post them for sale. I do have a scope camera and will list them with scoped pics.
Sent from my iPhone using Tapatalk
__________________
...Steve T. "Resurrection of a 1970 Trans Am" Blog www.455hota.wordpress.com ------------------------------------- 1966 GTO 4 speed Hardtop Alabama car (Marina Turquoise w turquoise interior) 1970 TA 4 speed Canadian car (Lucerne Blue w bright blue interior) |
#9
|
||||
|
||||
Interested
|
Reply |
|
|