FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
67 GTO 1/4 panels
There is a RUMOR, that the new Dynacorn 67 GTO quarters are gonna start shipping "this month".....anyone hear anything? And will PY carry them? Eric
|
#2
|
||||
|
||||
we will if they come out
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#3
|
|||
|
|||
I figured you would Chris, I was trying to "substantiate the rumor".....FYI OPGI says they are expecting a delivery on 6/9-6/20...(on line catalog).....Gonna call you tomorrow re: 67 GTO show chrome bumper....Thanks, Eric
|
#4
|
|||
|
|||
I used the skins and block sanded them perfect. Wish the full quarters had been available 2 years ago.
|
#5
|
|||
|
|||
If you look at the picture of the quarters they look like 66 quarters. The bumper ar4ea looks like a 66.
http://www.opgi.com/searchpart.asp?s...&submit=submit |
#6
|
|||
|
|||
rubbing hands...
67 sport coupe too?
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#7
|
|||
|
|||
Cam, Only saw HT......
|
#8
|
||||
|
||||
When you call, ask for Ed, he is our Purchasing Manager and can try and confirm whether this is finally happening.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#9
|
|||
|
|||
Like I said before, the ones on the OPGI site look like 66 quarters.
|
#10
|
|||
|
|||
Dynacorn's web site says as of 11/2010 they have no idea when the quarters will be ready and told another guy he was crazy if he thought they were coming out in 2011.
I've seen earlier messages on their web site about 2 years ago that said they abandoned the project with their current tooling and were looking for a decent car to use to create new tooling. I've been following this project since 2005 and they have made zero progress. I'll be completely shocked if they ever come to be. We can always hope but I would not delay my restoration waiting for them.
__________________
Check out my cruise night! www.brewcitycruisenight.com |
#11
|
||||
|
||||
Are they here yet?
Bump! Are the 1967 GTO rear quarters here yet?
|
#12
|
|||
|
|||
Wow i hope it happens i need a set also!!
|
#13
|
|||
|
|||
I put the skins on my car and they came out great. So I don't need them anymore
|
#14
|
|||
|
|||
I wish this were true, I would order 2 tomorrow. Hope you read this dynacorn!
__________________
William (BJ) 1966 Pontiac GTO |
#15
|
|||
|
|||
I'd buy a set "to keep in stock"!!!!.....DYNACORN? Look what I had to go through because YOU guys won't make us some Q'panels!!!!
Last edited by ERIC AULL; 09-23-2011 at 09:32 AM. |
#16
|
|||
|
|||
Eric do you have some pics of the quarter panel skins before you installed them. I would like to see these from different angles I'm trying to visualize just how much metal there is in certain places... Thanks!
__________________
William (BJ) 1966 Pontiac GTO |
#17
|
|||
|
|||
William, I used the lower rear patch panels. they are about 14" tall and go from the wheel well to the end of the 1/4.....I did not use the entire skin. If you need to patch in front of the wheel well, you will need to cut a piece out of a whole skin. I think these are all the pics I have of the 1/4 patch in place. I will tell you that it is an EXCELLENT fit. Eric
|
#18
|
|||
|
|||
Thanks for the info and pics!
__________________
William (BJ) 1966 Pontiac GTO |
#19
|
||||
|
||||
Quote:
Steve
__________________
"No you fool, we're following orders. We were told to comb the desert so we're combing it." |
#20
|
|||
|
|||
Yes that helps very much as well, thanks!
So I don't have a welder or feel comfortable in my abilities to weld on a quarter skin correctly. Is this a part that could be installed using a panel bond epoxy? Or do I just need to part with some cash and pay someone to do it properly?
__________________
William (BJ) 1966 Pontiac GTO |
Reply |
|
|