| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-26-2024, 11:41 PM
|
|||
|
|||
Wtb 8.5 inch posi carrier and gear set.
Looking for a reasonably priced posi carrier and gear set for an 8.5 inch ten bolt. I'd take any gear set from 3.08 to 3.42
|
|
#2
02-27-2024, 08:52 PM
|
||||
|
||||
|
I have an 8.5" 3.42 posi dated June 1978.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
|
#3
02-28-2024, 11:08 AM
|
|||
|
|||
|
Didnt they use a smaller axle on some 8.5?
i.e. 28 spline
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
|
#4
02-28-2024, 01:00 PM
|
||||
|
||||
|
Yup. 30 spline for trucks.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
|
#5
02-28-2024, 03:19 PM
|
|||
|
|||
|
Ive been collecting 8.5s for S10 Blazers and trucks
the early ones were 28 spline
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
