FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
PONTIAC "N" CRANK # 9799103 3.25 MAINS
PONTIAC "N" CRANK #9799103
3.25 MAINS / 4.21 STROKE Crank has been cut 20/20 on Main/Rod journals. I just picked it up from the machine shop with a good bill of health. They checked for cracks and polished the Main/Rod Journals $ 155.00 + Packaging and handling. Located in South Florida. (Homestead) SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#2
|
|||
|
|||
Still available... Great "N" crank ready to use...
.... Lightly used... LOL SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#3
|
|||
|
|||
Still Available...
SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#4
|
|||
|
|||
Just got home from military training... This crank is still available.
SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#5
|
|||
|
|||
Reduced price to 125.00
This crank is still available. Machine shop inspected. This is not a pick and pull crank. Rest assured that this is a good crank! I did pay to have a machine shop inspect it for cracks and they gave it a clean bill of health (Twice). I took it into the machine shop in Texas back in 2002 when I was first going to build the 455. That project was put on hold... It sat (Upright) for 18 years. I was about to build the 455 block again and took all the parts to another machine shop here in Florida to be cleaned and inspected once again just to make sure all was still good. However after the parts where inspected I had decided to go with a 4.5 stroke and after market block. This is a 455 crank from a 1975 block. It has been turned 20/20 so keep that in mind when ordering bearings for it. It has never been used since the last two trips to the machine shop. First trip it was cleaned up about 18 years ago. It sat in storage and just recently sent back to a local machine shop to get inspected / cleaned for a build. They cleaned it up and even MAG checked for cracks / damage and given a good bill of health. <p> This crank is ready for a good home. We do not aim to make money on shipping! I am only asking $75.00 to contribute for shipping. I do expect shipping to cost more. We will eat any additional fees over $75.00. If shipping is LESS than 75.00 we will issue a refund for the difference in shipping. (That's how we roll here!) Click here to buy with Pay Pal or use credit card. http://airram.com/product.php?catego...hquery=pontiac SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#6
|
||||
|
||||
WOW, I just had two cranks ground and it was $150.00 A piece.
Sounds like a good deal to me for the price. GLWS GT. |
#7
|
||||
|
||||
I'll be in Bradenton for the NMCA race if you want to deliver it. Let me know.
__________________
Randy Repp 1964 GTO "GoatZilla" 1964 GTO "Injunuity" A/FX Nostalgia Super Stock 220" Rear Engine Pontiac Powered Dragster https://www.facebook.com/PontiacSpeedShop/ https://www.facebook.com/GoatZillaRacing/ https://www.facebook.com/groups/RebuildExcitement/ https://www.facebook.com/Call1844RacersRV/ https://www.facebook.com/groups/INJUNWARS/ |
#8
|
|||
|
|||
** SOLD ** (& Shipped)
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
|
|