[tinindian68]

All parts removed from a running 68 250

I'm pulling this engine apart completely, so if you need something not listed, just ask. This is a complete, original engine. Everything is in good usable shape. All prices do not include shipping. Pickup or possible delivery available on the bigger/heavier stuff. Located in Northeastern Pennsylvania.

Everything's negotiable. I'd rather see these parts used than sit around.

Can cover with cam, followers and lifters. $125 ran quiet

68 1bbl head - recent valve job, cleaned and cut. No cracks, you can bolt this on and go. $150

Accessory drive - $50

Fuel pump - $20

Distributor with pertronix conversion. New cap and wires - $100

Power steering set up - comes with all brackets, 69 short water pump and pulley. Water pump was tapped for bypass fitting. Pump ran quiet. Brackets are all in nice shape. Bolt on and go - $300

OHC bell housing with inspection cover - $175

OHC flywheel - $175

A-body motor mounts and frame mounts - $50

1 bbl Air cleaner - $50

1 bbl Carb - $35

Exhaust - nice shape - $100

Starter - $50

Timing cover set - no cracks -$50

Misc brackets, clips, etc - let me know what you need.

Oil fill tube, cap and breather hose - $20

[Grokk]

you still have the Distributor?

[tinindian68]

Originally Posted by Grokk

you still have the Distributor?

Yep.

Shipping would be $13.60 in the US.

[tinindian68]

Starter, timing cover set and distributor all sold.

[pontiacs-r-us]

Carb still available?


Sent from my iPhone using Tapatalk

[tinindian68]

Originally Posted by pontiacs-r-us

Carb still available?


Sent from my iPhone using Tapatalk

Yes it is.

[tinindian68]

Head, Cam Cover, Cam, Lifters and Followers all sold. Thanks Wayne!

[tinindian68]

Oil fill tube sold!

[tinindian68]

Here are some pictures of what's left. Feel free to make an offer on this stuff before it goes to eBay.

Bell Housing and Inspection Cover. Includes Clutch Fork. ($175)



Accessory Drive ($50) and Fuel Pump ($20)



Motor Mounts with Frame Mounts ($50)




Thermostat Housing with Bypass ($25)



Carb ($35)



Air Cleaner ($50)



Heat Riser Hose Mount ($25)



Choke ($25)



Carb Bellcrank ($15)



1 BBL Throttle Bracket ($20)



Molded Radiator Hoses - Good Shape ($25)



Head Bolts ($15)



OHC Specific Battery Tray - A Little Thin, but really usable ($20)



68 Single Groove Water Pump Pulley ($30)



Original Coil - Worked Great ($25)



Fuel Line and Vacuum Lines - Someone cut the last 3 inches of fuel off ($20)




Intake/Exhaust Bolt Set ($15)



Misc. Brackets ($5 each)






Manual Steering Box, Rag Joint and Pitman Arm ($100)




Timing Gear ($30)

[tinindian68]

Also have a complete power steering set up. Includes brackets, pump, alternator and water pump pulleys, belts and a pressure hose that fits the later model o-ring steering box and original flare fitting in the power steering pump $(300). The water pump pulley is a 1969 short pulley. I can include a rebuilt 1969 water pump if needed.

[tinindian68]

Air Cleaner Assembly sold!

[tinindian68]

Accessory Drive and Fuel Pump sold!

[tinindian68]

Motor mounts sold!

[tinindian68]

Power Steering Set Up sold!
Throttle Bracket sold!
Intake/Exhaust Bolts sold!

[tinindian68]

Carb sold!

[tinindian68]

Flywheel sold!
Battery Tray sold!

[tinindian68]

Bellhousing sold!

[The Boss]

Why are you taking that car apart?

[tinindian68]

Originally Posted by The Boss

Why are you taking that car apart?

I rebuilt the head, and ran around with it for a while. It was just completely gutless. I put a Pontiac V8 in its place. Kept the 3 speed. Trying to get it ready for the Pypes show.

[The Boss]

Okay, I was worried you were taking the whole thing apart - not that you can't but having survived as long as it has...

It'll be good to see it again!