Home Menu

Menu


          
PY Online Forums - Bringing the Pontiac Hobby Together > Classic TECH- specs, codes, resto issues FORUMS > 70-73 Firebird & TA TECH > having issues with my sail panels purchased from AMES
Reply
 
Thread Tools Display Modes
  #1  
Old 10-13-2023, 06:01 PM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default having issues with my sail panels purchased from AMES
never had a problem from the parts i buy from Ames , but the sail panel do not fit right .Any one else had this issue
Attached Thumbnails
Click image for larger version Name: ass.jpg Views: 177 Size: 33.1 KB ID: 621604  

Last edited by grd777; 10-13-2023 at 06:24 PM.
Reply With QuoteReply With Quote
  #2  
Old 10-13-2023, 06:22 PM
Trevor78 Trevor78 is offline
Suspended
  
Join Date: May 2022
Posts: 595
Default
Looking at that they likely go under the rear trim

Reply With QuoteReply With Quote
  #3  
Old 10-13-2023, 06:24 PM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by Trevor78 View Post
Looking at that they likely go under the rear trim
no i can not get it far back enough to make it fit Just checked the ones OER sells and the look more correct

Reply With QuoteReply With Quote
  #4  
Old 10-13-2023, 06:48 PM
Trevor78 Trevor78 is offline
Suspended
  
Join Date: May 2022
Posts: 595
Default
Ok, and yes pics look like it goes over as shown. Can you roll it into place from side rather than push backwards?

Last edited by Trevor78; 10-13-2023 at 06:54 PM.
Reply With QuoteReply With Quote
  #5  
Old 10-13-2023, 07:29 PM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by Trevor78 View Post
Ok, and yes pics look like it goes over as shown. Can you roll it into place from side rather than push backwards?
when i install against the roof pillar it will not go any further back . cant stand when these repo parts don't work . i wonder why no one else had this problem i guess i will buy the ones from OER AND REPORT BACK TO INFORM THE OTHER GUYS IF THE FIT BETTER

Reply With QuoteReply With Quote
The Following User Says Thank You to grd777 For This Useful Post:
  #6  
Old 10-13-2023, 09:23 PM
burd's Avatar
burd burd is offline
Ultimate Warrior
  
Join Date: May 2011
Location: MOTOR CITY
Posts: 1,549
Default
I’d use nOS myself.

__________________
🧩 Burds Parts, Finding those Hard to Find PCs, no Fisher Price Toys Here

Just Say No To 8” Flakes

F ire B irds

🇮🇱
Reply With QuoteReply With Quote
  #7  
Old 10-13-2023, 09:34 PM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by burd View Post
I’d use nOS myself.
ok if i can find them i will buy them ?

Reply With QuoteReply With Quote
  #8  
Old 10-14-2023, 07:55 AM
Trevor78 Trevor78 is offline
Suspended
  
Join Date: May 2022
Posts: 595
Default
All well and good suggesting that if they were available.

Reply With QuoteReply With Quote
  #9  
Old 10-14-2023, 08:44 AM
Mr Twister's Avatar
Mr Twister Mr Twister is offline
Chief Ponti-yacker
  
Join Date: Jul 2004
Location: Wayland, Michigan
Posts: 934
Default
Possibly some extra material/mold flash in the u shaped leading edge that hooks over the pinch weld in the front?

Reply With QuoteReply With Quote
  #10  
Old 10-14-2023, 09:49 AM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by Mr Twister View Post
Possibly some extra material/mold flash in the u shaped leading edge that hooks over the pinch weld in the front?
will check that thanks for the tip

Reply With QuoteReply With Quote
  #11  
Old 10-14-2023, 10:02 AM
burd's Avatar
burd burd is offline
Ultimate Warrior
  
Join Date: May 2011
Location: MOTOR CITY
Posts: 1,549
Default
Gastro, I Didn’t sell any nOS on Dayton, just rusty junk. I had a whole table of nOS, it all went back home. Other than the serious collector, people won’t pay for it.

__________________
🧩 Burds Parts, Finding those Hard to Find PCs, no Fisher Price Toys Here

Just Say No To 8” Flakes

F ire B irds

🇮🇱
Reply With QuoteReply With Quote
  #12  
Old 10-14-2023, 11:53 AM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by burd View Post
Gastro, I Didn’t sell any nOS on Dayton, just rusty junk. I had a whole table of nOS, it all went back home. Other than the serious collector, people won’t pay for it.
i do and will for NOS .DO YOU HAVE ANY SAIL PANELS NOS

Reply With QuoteReply With Quote
  #13  
Old 10-14-2023, 03:16 PM
Norwood's Avatar
Norwood Norwood is offline
Ultimate Warrior
  
Join Date: Oct 2002
Location: Bartlett, Illinois
Posts: 6,645
Default
In all likelihood whoever you buy them from they come from the same source.

Reply With QuoteReply With Quote
The Following 3 Users Say Thank You to Norwood For This Useful Post:
  #14  
Old 11-01-2023, 02:18 PM
skunkwerks's Avatar
skunkwerks skunkwerks is offline
Senior Chief
  
Join Date: Jun 2014
Location: Dallas,Tx
Posts: 300
Default
Quote:
Originally Posted by grd777 View Post
never had a problem from the parts i buy from Ames , but the sail panel do not fit right .Any one else had this issue
You may have to drill a new hole in the lower area on the cars side to mount them correctly.

It really depends on where the factory drilled the original hole.

__________________
White/Blue 71 455 HO T/A Auto
Blue/Blue 71 455 HO T/A 4 Sp
White/Sandalwood 71 455 HO T/A 4 Sp
White/Black 70 RAIII T/A M21/373 (stripper)
Carousel Red/Black 69 GTO Judge 4 Sp
2002 Firehawk Red/Black 6Sp
Reply With QuoteReply With Quote
  #15  
Old 11-01-2023, 07:08 PM
grd777 grd777 is offline
Ultimate Warrior
  
Join Date: Aug 2015
Location: Toronto canada
Posts: 1,066
Default
Quote:
Originally Posted by skunkwerks View Post
You may have to drill a new hole in the lower area on the cars side to mount them correctly.

It really depends on where the factory drilled the original hole.
not worried about the hole .its were it meets the upper glass. thesE ones are for a 73-74 OER MAKES THE CORRECT ONES FOR 70-72 CHECK THEM OUT ON THE WEB AND YOU WILL SEE THEY ARE NOT THE SAME

Reply With QuoteReply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:45 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Contact Us Home
Copyright © 2017