FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Pontiac cast iron production.
In the great and very informative Pontiac made film that can be found on You tube titled “455 casting and machining for original production in 1970” it’s stated that Pontiac made its cast iron at that point in time by the electro arc method as opposed to the Crucible method.
The electro arc method produces a better quality cast iron . My question going out here is does anyone know when Pontiac changed over to this to this better production method? It’s also stated in this film that when the factory applies the the final balance job to each motor that the result is a motor balanced to within 1 1/2 inch Oz. Pretty darn good you have to admit! If you watch this 11 minute long video note that at one point the audio drops out for some two minutes, so it’s not on your end. On a side note here I just finished porting a set of AMC 390 heads and in all my decades of grinding on cast iron I have flat out never encountered a head that ground so easy, surprisingly soft cast iron !
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! Last edited by steve25; 10-05-2023 at 07:20 AM. |
The Following User Says Thank You to steve25 For This Useful Post: | ||
#2
|
||||
|
||||
Didn't watch the video but those AMC heads move some air. Those were the first heads I worked on that had the coat hanger stuck in the water jacket. The Wenzlers were the second. I didn't figure out what their purpose was until Frank from AP explained it because they caused an issue with a batch of their blocks during the casting process.
|
The Following User Says Thank You to PAUL K For This Useful Post: | ||
#3
|
||||
|
||||
Yup found out about the so called coat hanger sand core holder on a straight 6 head so darn long ago that I don’t even recall what the heck brand it was from!
Flow wise, yes the AMC head has a as cast intake throat size that’s a very large percentage for its valve size used. In the high lift range they flow right in the ball park of what the post 1970 455 HO heads do ( at least on the intake side) ,but with a fair amount smaller port volume. In fact to me a volume just right for a every day street 390 motor.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#4
|
||||
|
||||
Interesting video. Was that the Super Duty valve cover sticker on that engine visible in the last few seconds? Here's the link-
https://youtu.be/9LuXf6gJ-jg?si=WEgzZyLLg1_ETqRa
__________________
Greg Reid Palmetto, Georgia |
#5
|
||||
|
||||
It's interesting that the video is still up. It used to be when it (and the others in the series) were on, it seemed to be taken down. Not sure if it was Pontiac at that time or GM.
I have most of the videos downloaded. (when it was easier to download) It's a very cool video, need to see the others in the series.
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
Yes, I thought I saw that same thing on the valve cover, but this is 1970 .
But then again what do know now is that the SD455 was in the works before the round port 455 HO motors, so maybe that was one of the preproduction test motors for the engineering dept.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#8
|
||||
|
||||
Quote:
|
#9
|
||||
|
||||
After watching another one popped up focusing on Fisher Body. I haven't finished watching but also very interesting.
__________________
Greg Reid Palmetto, Georgia |
#10
|
||||
|
||||
Thanks for the link.
I don't have any idea when they would have changed their cast iron process but I enjoyed watching the video. Very cool to see the scale of that operation. Even though my education was in metallurgy, I'm kind of glad I didn't work in primary metals beyond a couple summer jobs. That's a rough world. It's sad that so much manufacturing is gone, though. On the other hand, I cringed watching the workers man-handle crucibles of molten iron and breathing all the crap. This is a great example of hazards that probably led to OSHA regulations. I'm sure those jobs paid well, but IMO nobody got paid enough to take that risk... but the world back then was different. |
The Following 2 Users Say Thank You to Shiny For This Useful Post: | ||
#11
|
|||
|
|||
Quote:
__________________
“It takes considerable knowledge just to realize the extent of your own ignorance.” Dr. Thomas Sowell |
#12
|
||||
|
||||
Quote:
K
__________________
'63 LeMans Convertible '63 Grand Prix '65 GTO - original, unrestored, Dad was original owner, 5000 original mile Royal Pontiac factory racer '74 Chevelle - original owner, 9.85 @ 136 mph besthttp://www.superchevy.com/features/s...hevy-chevelle/ My Pontiac Story: http://forums.maxperformanceinc.com/...d.php?t=560524 "Intro from an old Assembly Plant Guy":http://67-72chevytrucks.com/vboard/s...d.php?t=342926 |
The Following User Says Thank You to Keith Seymore For This Useful Post: | ||
#13
|
||||
|
||||
Quote:
I just watched this one about Fisher Body, also very interesting. There are several sections featuring the Firebird and G/P design. https://www.youtube.com/watch?v=yYgxgGlN8CM |
#14
|
|||
|
|||
Keith, they say 1.5 ounces. That is still 42.5 grams. I don’t know about you, but 42.5 grams out of balance is a non starter for me. I went back an re-read the OP’s post. Yes, 1.5 inch ounces would be a very low breakaway point in an engine.
__________________
“It takes considerable knowledge just to realize the extent of your own ignorance.” Dr. Thomas Sowell |
#15
|
||||
|
||||
I will go back and watch it again and listen more closely, maybe it was stated as 1/2 a inch Oz.
Jack to help answer your block strength question here is a copy of the 1970 production specs. Note that the block material on all the engines is listed as being the same. When you look at my other page shot next to the Crank listing you will see that only the 4 bolt main caps are speced as being the better more ductile Armasteel cast iron. If the RA4 blocks where made of better cast iron I would expect that they would have a notation as being made by this better formulation of iron.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#16
|
|||
|
|||
Quote:
__________________
“It takes considerable knowledge just to realize the extent of your own ignorance.” Dr. Thomas Sowell |
#17
|
|||
|
|||
I have not watched that video for a few months.
The way I remember it, they say the balance is within 1 1/2 ounces, but NOT "inch-ounces". They don't specify if that's 1.5 ounces at the front of the crank, and 1.5 ounces at the rear, or 1.5 ounces total, or something else. What they say...is almost totally meaningless in terms of balance (except that by aftermarket standards, there's no way to interpret it that their 1.5 ounces of imbalance doesn't SUCK. The only saving grace is that most of those engines never saw 5000 rpm. Maybe never saw 3500 rpm.) "Nickle" in the iron of engine blocks and cylinder heads seems to be a myth that won't die. There's a hundred formulations of cast iron, plus heat-treatment including "lack" of heat--cryogenics. When Chevy wanted a higher-quality block, they added--and advertised--TIN, not nickle. Pretty-much every one of the GM "sister divisions" has enthusiasts that brag-up the quality of the iron in their blocks and they always claim that their brand uses "nickle" in the iron...except Chevy with their mostly-soft iron, heavy bore wear and seat recession. Same with Ford "Fairlane" "90 Degree" "Small-blocks". Garbage iron. |
The Following User Says Thank You to Schurkey For This Useful Post: | ||
#18
|
|||
|
|||
Quote:
__________________
“It takes considerable knowledge just to realize the extent of your own ignorance.” Dr. Thomas Sowell |
#19
|
||||
|
||||
When you read up on the arc melting process just like what’s stated in the video it produces a cleaner iron with less impurities then the old crucible method at the get go.
So does this not make for a better cast iron? My main reason for this post was to see if for instance the change over to the electro arc method may have came about at the same time in 55 with the first V8s showing up, or if it was later.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#20
|
|||
|
|||
When Mike Lewis balanced my rotating assembly he told me not to mix up my pins with the pistons.
Whatever the tiny amount of difference it was it was calculated in the balance job. Its good to have a detail nut as your machinist. |
The Following User Says Thank You to Dragncar For This Useful Post: | ||
Reply |
|
|