FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Where to apply adhesive on weatherstripping
Some of my weatherstrip is gone and some I have removed. I am not sure where and where not to use adhesive.
Vent window assembly - I found no evidence of adhesive use when I removed everything. Do you use adhesive to install for the vent window rubber or the material for the door window track Door - Mine is gone and do not see any residue. Seal has pins that insert to door Trunk - I have not removed yet. Do you use adhesive all the way around or just at the joint where the ends meet. |
#2
|
||||
|
||||
year, make and model would help. on my 63 bonne i just put a little on the ends for the doors even though they had the pins.
__________________
DBANDGB |
#3
|
|||
|
|||
duh
66 2+2 convrt |
#4
|
||||
|
||||
My 64 vent window seals clipped in with clips provided by steele (formed part of the seal) door is all push in pins, trunk was pressure fit in the cavity.
__________________
It's hard to soar like an eagle, when you're surrounded by turkeys! My wife says she'd llike my car a lot more if it wasn't mine. 64 Grand Prix 389 .030, 1.65 Scorpion Rollers, Tripower, RARE Long Branch, Custom Stainless Exhaust and mufflers, 3.90 posi 200-4R. 068 cam. |
Reply |
|
|