FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Aluminum Super Rods f/s
Complete matched set of aluminum Super Rods purchased from Butler back in the day. I bought these new from JBP as part of a Ross piston, cast crank rotating assembly. They have 67 passes on them and have never been hurt. They've been in climate controlled storage and stored with the bolts loose.
Rods are; 6.800 long .990 pin BBC 2.200 big end ARP bolts Also comes with copy of the original Spec. sheet $225 shipped to the lower 48 States |
#2
|
||||
|
||||
I'm interested..any issue with stretch or anything ?
|
#3
|
||||
|
||||
Sending pm
|
#4
|
||||
|
||||
Bump
|
#5
|
||||
|
||||
Bump
|
#6
|
||||
|
||||
Bump
|
#7
|
||||
|
||||
Hmmm.
|
#8
|
||||
|
||||
I don't have a stake in these so don't think I'm shilling, just sharing some first hand knowledge from a well known racer. Charlie Baesch ran a set of these rods in a street car for 15 odd years through all various driving conditions, including beating the hell out of them street racing. They never failed. 67 passes is nothing, they should be good to go.
__________________
Just a blind squirrel looking for a nut. |
The Following 2 Users Say Thank You to Brian Baker For This Useful Post: | ||
#9
|
||||
|
||||
PM sent
__________________
1969 Firebird, Tx3-455/468 machined by CVMS E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid 850DP on E-85 by Eric Niefert/T2 1" plastic spacer T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400 1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine) https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be 1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine) |
#10
|
||||
|
||||
|
#11
|
||||
|
||||
Seems i should post to take them.
|
#12
|
||||
|
||||
Committed to Buy em. Paul, Thanks Mark
Ima gonna need 4.180-4.185" slugs for 6.8" rod 990 pin, and 4.21" Stroke. |
#13
|
||||
|
||||
PAID.
Gonna need 455+030/035/040 slugs with 990 pins for 4.21". Need to do some stupid trades for some stupid stuff: a 455 Lifter Valley Brace; Used is interesting, oil pump & pan, 2-row timing set. |
#14
|
||||
|
||||
fixed it.
|
Reply |
Thread Tools | |
Display Modes | |
|
|