FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
1962 GP rear molding attachment
This piece was in the trunk when I bought the car. Anyone know what was used to attach the trim piece? It looks like a fine thread bolts?
|
#2
|
|||
|
|||
Bolts with large washers. You will notice that the mounting points match the holes in the rear body panel.
|
#3
|
||||
|
||||
Lets see the back of the trim piece and the studs will tell you.
__________________
DBANDGB |
#4
|
||||
|
||||
There’s no studs just threaded holes. Whoever removed it didn’t put the bolts with it in the trunk. Looking in the mounts it looks like a real fine thread bolt. Maybe 1/4”. X 28. I’ll dig into it more, I’ve already searched the factory shop chassis manual and it does not give bolt sizes. I was hoping someone knew but I’ll figure it out. Thanks
|
#5
|
||||
|
||||
1/4 20 x 3/4 bolts fit perfectly
|
#6
|
|||
|
|||
I've had a few rear panels as well as a bunch of the bolts but over the recent years I've been blowing out all my '62 GP parts as I haven't owned one in awhile.
|
Reply |
|
|