FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Need Front Floor mats ..67 GTO Help !
Looking for some nice fitting front floor mats...that don’t scrunch up ...and don’t send me to Ames . I bought their mats...and am not happy.
So if there is another vendor....that would be much appreciated. |
#2
|
|||
|
|||
Anyone ?
|
#3
|
|||
|
|||
Can you place a few tabs of Velcro on the underside to hold them in position. Just a random thought. I hate it as well when floor mats don't stay put.
Tim john--- |
#4
|
|||
|
|||
Quote:
more often than not I found usable original mats cheaper than the repop trash but that was a few years ago. not much on there now. I see a blue passenger side and that's about it right now. but I'd keep chasing it that way. I never had any luck with wanted ads here on PY. https://www.ebay.com/itm/27563681883...temCondition=4 |
#5
|
|||
|
|||
I'd like to quantify the differences between originals and reproductions. I bought mine from Inline Tube in 2019 and measured 0.163" on the thicker parts and 0.086" for the grooves. The material is very pliable but I don't have any scrunching problems or it moving. What are the thickness of the originals?
|
#6
|
|||
|
|||
Quote:
with originals, there's no real difference hot or cold and it was never an issue again for me. Maybe they've changed rubber formulations since I abandoned repops. I've had 2 sets of them. one bought from Ames in 1997 and the other set from Ames in 2006. After fighting with them for years and frustration I tracked down originals and have never looked back. Again, this is my experience with them, but in both cases, the repops got rock hard when it's cooler out and the factory ones don't. |
#7
|
|||
|
|||
Based on your description, I'll have to try an experiment when the wife makes some room in the freezer. I'll take the reproduction mat and a remnant from my new molded carpet and measure friction between the surfaces at ambient temperature and at 0F to see the hardening and slippage.
|
#8
|
||||
|
||||
Check with Paul L, he might know where there is a set of originals.
|
#9
|
|||
|
|||
Made these myself
|
#10
|
|||
|
|||
|
#11
|
|||
|
|||
Good idea
|
Reply |
|
|