FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Who makes a water neck that is turned at about a 45 degree angle to the front for ponchos? Don't like the swivel jobs and way too expensive. I don't have any obstructions and want to go directly from rad to crossover. Guess I could turn mine 90 degrees and re-tap crossover. Might have to build up a boss with the old heliarc for the flanges. Anybody got other ideas on what you have done?
Phil
__________________
"dreamed I was wide awake........woke up and I was sound asleep" |
#2
|
|||
|
|||
Who makes a water neck that is turned at about a 45 degree angle to the front for ponchos? Don't like the swivel jobs and way too expensive. I don't have any obstructions and want to go directly from rad to crossover. Guess I could turn mine 90 degrees and re-tap crossover. Might have to build up a boss with the old heliarc for the flanges. Anybody got other ideas on what you have done?
Phil
__________________
"dreamed I was wide awake........woke up and I was sound asleep" |
#3
|
||||
|
||||
I had to butcher a Tripower waterneck to get what I wanted.
Perhap you could shop around the U-Pull-it yards instead of AutoZone or PeppBoyz.
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
Reply |
|
|