FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
WTS: Stock used Pontiac valves 2.11/1.77. 13xI, 16xE
All valves are stock length. Overall good condition but dont take my word for it, they have not been inspected and tested. All I can say it that they were all removed from recently running heads (2 sets). 3 intakes were bent and junked.
13 Intake 2.11 16 Exhasut 1.77 100$ plus shipping Thanks for looking |
#2
|
|||
|
|||
overall length is a key selling feature
__________________
1989 Automotive Hall of Fame Inductee |
#3
|
||||
|
||||
Stock length as stated. I believe most people here know what a Pontiac stock valve length is.
+-4.950" |
#4
|
|||
|
|||
"Stock" length depends on many factors. For example the plus or minus 4.95" length is too short to use in the 67-70 high compression heads so they are more than likely from 71-72 heads
__________________
1989 Automotive Hall of Fame Inductee |
#5
|
|||
|
|||
off top of my head, can think of 4 different length stock application '67-72 Pontiac 2.11-1.77 valves
__________________
Buzzards gotta eat... same as worms. |
#6
|
|||
|
|||
Yes if you include the less than common Ram Air II, IV and 1970 #64 heads
__________________
1989 Automotive Hall of Fame Inductee |
#7
|
||||
|
||||
Bump
|
#8
|
||||
|
||||
Bump
|
#9
|
||||
|
||||
Did you ever measure the length?
GT. |
#10
|
||||
|
||||
4.950"
|
#11
|
||||
|
||||
Bump
|
Reply |
|
|