#1  
Old 01-26-2016, 11:39 PM
jonathonar89 jonathonar89 is offline
Senior Chief
 
Join Date: Aug 2011
Location: Island Lake, IL
Posts: 265
Default '98-'02 F-Body aluminum rear brakes

I'm selling a pair of R (driver side) '98-'02 LS1 style rear brakes. This will consist of aluminum calipers, aluminum backing plates and drum style emergency brakes. One of them will be modified so that both emergency brake levers pull forward like an early GM car. Just be sure that you know if you're using staggered shock absorbers like on an 1st/2nd gen F-Body, you will need to possible move the shocks and run atleast a 16" wheel. This is a popular autocross/pro-touring upgrade for early cars. Some even prefer these over the Corvette caliper because the piston bore is slightly larger than C5.

These can be used on most early GM 10 bolt rear ends if you use spacer such as the ones from BRP Hot Rods...
http://www.brphotrods.com/mm5/mercha...ry_Code=BRK12F

$150 shipped

Below is two "98-'02 F-Body L/R setups pictured so you see where they came from.





Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:33 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017