[PLongen]

Has anyone used the aftermarket timing cover from Ames on the 4 cylinder engine?:
https://www.amesperf.com/parts/searc.../?term=+LN482P

[tom s]

Does your engine have a 8 bolt cover or a 4 bolt?I believe the 4 cyc use a water pump with shorter vains.Tom

[PLongen]

mine has a 4 bolt but the casting is very pitted.

[tom s]

You will want to find a 63 4 cyc 8 bolt water pump.Tom

[Peter Serio]

4 or 5 years ago on this forum there was a thread on the 62 & 63 Tempest water pumps and in that thread there were photos of the back sides of pumps side-by-side and there was a specific 4 cyl water pump (for both '62-63 4 bolt and '63 8 bolt timing covers).

Something about the fins on the back of the impeller were different between '63-326 V8 cars and the 4 cyl. Either shorter fins and/or fewer of them.

[Radman]

It took me a while to find this one. Purchased it while I was working on my 62. Check the casting numbers, I think that it will fit your 63. PM me if you want the part. Also are you a member of the Little Indians car club If not, you should join.

[63Banshee]

V8 pump on a 4cyl isn't a problem. 4 on an 8 will cause heating issues.

[PLongen]

Originally Posted by Radman

It took me a while to find this one. Purchased it while I was working on my 62. Check the casting numbers, I think that it will fit your 63. PM me if you want the part. Also are you a member of the Little Indians car club If not, you should join.

PM you

[PLongen]

Originally Posted by Radman

It took me a while to find this one. Purchased it while I was working on my 62. Check the casting numbers, I think that it will fit your 63. PM me if you want the part. Also are you a member of the Little Indians car club If not, you should join.

Hope I can find a water pump now. Nobody seems to have any.