[1973Formula]

I need some parts for my '72 Formula.

I need the following:
Timing Cover Long Bolts (6)
Water Pump to Intake Long Bolt(1)
Intake Manifold Bolts/Studs (10)
Carb Bolts/Studs (4)
Throttle Cable Bracket (2)
Choke (1)
Vacuum Valve (1)
Fan/Water Pump (4)
Crank Pulley (4)
Oil Filter Housing (3)
Thermostat Housing Bolt/Stud (2)
AC Bracket to Intake (1)
AC to Head
Coil Bracket
Rear Starter Support Bracket

[Pepi]

I think I have a coil bracket that was re-plated sitting around some where. I'll try digging it out.

[Scott Thelander]

I have everything but the intake bolts

Scott68gto@comcast.net

if you still have a need..... all oem .......

Scott

[1973Formula]

Here is a detailed list of the hardware I need.

Not sure what bolts are used on the Fan Clutch, but I need 4 of those too.

Also need a Coil Bracket:

Water Neck 478144:


Most of the original bolt heads should look like this:


Bolts-
10- 5/16”x5/8”
1- 5/16”x1”
3- 3/8”x3/4”
10- 3/8”x1”
2- 3/8”x2”
6- 3/8” Intake Bolts
4- 3/8” Intake Studs with 5/16” threaded heads
1- 3/8” Water Neck Stud with 5/16” threaded head

Nuts/Washers/Etc…
4- 5/16” Nuts (washer style nut)
2- 5/16” Washers
1- 3/8” Nut
3- 3/8” Washer
2- 3/8”x1” Steel Spacer (This is a round steel cylinder with a hole in the middle)

[70RAlll]

i have a water neck pm me

[Pepi]

I found the coil bracket and will take pictures later today......off to the parade.

[Pepi]

Here are a couple of pictures of the coil bracket with the condenser clamp that I have. It has been re cad plated a few years back, and is very clean. Is this what you are looking for? PM me if it is.

[Scott Thelander]

super gent to work with

boxed up the dozen or so items as requested and ready to ship monday

fast payment


thanks again for your patience and purchase

Scott