SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference.

          
 
 
Thread Tools Display Modes
  #1  
Old 02-08-2015, 12:42 AM
rskram rskram is offline
Junior Member
 
Join Date: Jan 2015
Location: Waterloo, Iowa
Posts: 1
Default IA2 and rotating assembly

I have a great deal for someone here....

I bought this stuff from Butler last spring intending to do a 700+ hp 535 build but financial trouble hit so I held off as long as I could but it's just not gonna happen.
Like they say, my loss is your gain.

I talked with Jim Butler and he discussed with Dave about a few things with my set up and these parts are all recommended by them for this application.

Anyway I planned on having 700+ horse on a pump gas motor and I told them that I wanted to spray it with a 500 shot of nitrous. So they recommended special order Ross pistons and Oliver rods also special rings that would hold up.

Obviously you don't have to spray it but it would hold up if you wanted to do that or even boost it down the road.

So this is what I have and all parts are new never used also they have either been in my bedroom closet or in a temperature controlled garage.

535 cu. in

My parts and cost

Cast Iron IA2 block 4.350 bore...$3250

Balanced Rotating Assembly...$3575

Forged steel crank w/3" main and 2.2" rod journals 4.5" stroke
Custom Ross pistons and Ferrea pins to withstand a 500 shot with 20cc dish to obtain 10.75:1 with 80cc heads zero deck
Oliver billet rods 6.8" 2.2" big end
Speed Pro race bearings
Total seal file fit AP Advanced Profiling rings for nitrous

Cometic head gaskets...$270
Aluminum threaded freeze plugs with o-ring...$90

The forged rotating assm. on Butlers site is $2500 but I you add $900 more for the Olivers and $175 more for the special piston rings and you get...$3575

So we have the block for $3250
Rotating assm for $3575
Cometics for $270
Nice freeze plugs for $90 and you get $7185 grand total

I will sell all of this for $5000

That's $2185 off and EVERYTHING is brand new! That's a steal cuz this is a bad ass setup.

You can come get it or I will drive 100-200 miles and meet you some place public.

Cash only, we can go to a bank wherever we meet to cash a money order or cashiers check if you don't want to carry that much cash with you on your drive. But when you drive off with my parts I need to be holding cash in my hand.

Thanks
Attached Thumbnails
Click image for larger version

Name:	Balance sheet.jpg
Views:	127
Size:	45.5 KB
ID:	389632   Click image for larger version

Name:	Block.jpg
Views:	208
Size:	49.3 KB
ID:	389633   Click image for larger version

Name:	Crank2.jpg
Views:	138
Size:	37.5 KB
ID:	389634   Click image for larger version

Name:	Pistons.jpg
Views:	148
Size:	48.7 KB
ID:	389635   Click image for larger version

Name:	Rods2.jpg
Views:	164
Size:	65.3 KB
ID:	389636  


  #2  
Old 02-08-2015, 05:39 AM
400 plus's Avatar
400 plus 400 plus is offline
Ultimate Warrior
 
Join Date: Feb 2003
Location: Ahead of you
Posts: 1,035
Default

PM sent

__________________
461 Stroker: 265/276 Comp Cam Solid roller . 340CFM E-Head Victor Intake 1050 Dom Carb. 390/430 9" Gears with a T400 trans 4200 converter. Street weight 3850. 1.49 60ft. 275/60/15 M/T DR 10.57 SO FAR
  #3  
Old 02-09-2015, 12:17 AM
xlrate's Avatar
xlrate xlrate is offline
Senior Member
 
Join Date: Feb 2003
Location: Kalamazoo MI
Posts: 112
Default

PM - Sent

Please keep me in line - very serious.

Thanks

Todd

  #4  
Old 02-09-2015, 11:06 PM
xlrate's Avatar
xlrate xlrate is offline
Senior Member
 
Join Date: Feb 2003
Location: Kalamazoo MI
Posts: 112
Default

sent PM - not sure if PY is working

Please email if you don't get PM xlrate@chartermi.net

  #5  
Old 02-10-2015, 10:39 AM
rohrt rohrt is offline
Ultimate Warrior
 
Join Date: May 2004
Location: Cedar Rapids, IA
Posts: 4,125
Default

That is a good deal wish you were closer.

Just kidding. Nick67 should by buying that from you.
Good luck with the sale.

  #6  
Old 02-10-2015, 09:23 PM
T.D.Vick's Avatar
T.D.Vick T.D.Vick is offline
Senior Member
 
Join Date: Aug 2004
Location: Elk River Mn.
Posts: 143
Default

Damn, I wish I hadn't already bought all the parts to build a stock 400 block stroker motor. I'm going to have almost as much into that as I would starting with your stuff...

__________________
'80 Grand Lemans
Was 301 C.I. Will be bigger soon.

00 GTP NBM / Graphite, Stock
Sold Aug. 2011

70 GTO Black / Black TH400
460 CID, 542 FWHP, 580 FWTQ
(Sold, Fall '09)

04 GTO Black / Black M6
Back to bone stock and sold, fall '05.
  #7  
Old 02-10-2015, 10:55 PM
rskram rskram is offline
Junior Member
 
Join Date: Jan 2015
Location: Waterloo, Iowa
Posts: 1
Default Sale pending

Thanks to everyone that responded to my add. I now have a sale pending and I'm pretty sure the stuff is sold. Sorry to the ones who wanted it but didn't get it.

 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017