FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
I was told that a Ford 460 rear main seal will work in a 400 Pontiac. Is this true ? Has anybody tried it ?
------------------ Ecclesiastes 9:11
__________________
"What we have here is, failure to communicate" |
#2
|
||||
|
||||
I was told that a Ford 460 rear main seal will work in a 400 Pontiac. Is this true ? Has anybody tried it ?
------------------ Ecclesiastes 9:11
__________________
"What we have here is, failure to communicate" |
#3
|
||||
|
||||
Go to http://www.bopengineering.com They make a seal specifically for the pontiac 3" and 3.25" rear main. You can get all the installation details there. You could of course order it from our sponsor Performance Years. I put one of these seals in my 67 400 this spring and it hasn't leaked yet.
__________________
'04 GTO Yellow Jacket, A4, Kooks, CAI, etc. '02 Firebird, V6, auto '68 GTO Convertible, HO, 4spd, driver '66 LeMans Hardtop, 400, FI, A/C, 4L80E. '64 GTO Hardtop, "389", Tri-power, 5 speed, A/C, Yorktown Blue. http://www.gtoaco.com |
#4
|
||||
|
||||
I just installed a BOP seal in a RA III 400 that I am rebuilding for a friend. At the machine shop that did his machine work told him that a 460 Ford rear main seal would fit and work in a Pontiac 3" crank engine. I was just checking with the Pontiac people to see if any body has done this.
------------------ Ecclesiastes 9:11
__________________
"What we have here is, failure to communicate" |
Reply |
|
|