FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
Front Bumper Hardware
I'm trying rebuild my '68 Bird and most of the nut, bolts and fasteners were pieced together. I ordered a hardware kit but I'm a bit lost since I don't know what goes where with a few of these bags of hardware.
I have attached a pic of the bumper hardware but need some help. The bolt with the nut (four of them) I know, the other 2 sets of bolts I don't. Does anyone know where they go on the bumper? Also, can I find this info online somewhere? Fish Sent from my SM-N960U using Tapatalk
__________________
Big Fish - Retired Air Force 1968 Pontiac Firebird 400 |
#2
|
||||
|
||||
No takers?
__________________
Big Fish - Retired Air Force 1968 Pontiac Firebird 400 |
#3
|
||||
|
||||
check out fig 14-9 http://thefirstgensite.com/library/68sm/bump/bump.html
link from this post. https://firstgenfirebird.org/forums/...&Number=313987 looks like the ones on the left are inside of the grills center bolts hold brackets to the frame right smooth head bottom of bumper to brackets.
__________________
67 Firebird Convertible Last edited by jwcfbd; 11-06-2020 at 11:52 AM. |
#4
|
||||
|
||||
Thx for the info.
That illustration in the Service Manual is what I have been using as well as the illustrated parts breakdown but neither really helped. The bolts in the middle and right did not come with washers/nuts which is why I confused about where they go.
__________________
Big Fish - Retired Air Force 1968 Pontiac Firebird 400 |
Reply |
|
|