[Mean Green]

Originally Posted by BB70

I use the good black permatex engine rtv between the block and tray or scraper. Beforehand wipe both surfaces with brake clean on a paper towel. Use a small bead , go to the inside of the bolt holes when you come to them.
Lay the tray down and lightly tighten all the bolts- let it dry overnight. Trim off the dry rtv that sqeezes out on the pan rail from under the tray. Put a small dab at the edges of the tray- block before the pan gasket goes on to fill the small voids

Thanks!

[gman005]

I use the Nitemare Perfomance pan.

[Dragncar]

Originally Posted by gman005

I use the Nitemare Perfomance pan.

How do you like it. I would like something like that but with a kickout so a scrapper can be used.

[gman005]

So far so good.

[blueghoast]

Originally Posted by gman005

I use the Nitemare Perfomance pan.

Got a picture of it? Thanks

GT.

[slowbird]

Their website
http://www.nitemareperformance.com/prices2.html