FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#141
|
||||
|
||||
Quote:
Take care, Bruce
__________________
1963 Bonneville SW 421HO 1967 Bonneville SW 400 1969 GP 428 4spd 1970 GTO 400 4spd 1970 Bonneville SW 455 1971 GP 400 4spd 1971 Grandville Conv 455 1972 Catalina Conv 455 1972 Grandville Conv 455 |
#142
|
||||
|
||||
A year and a half after finishing this car, i have finally finished the factory air cleaner. Saved the decal brucee70.
|
#143
|
||||
|
||||
Looks great Bob ...thanks for the pictures ! :-)
__________________
1963 Bonneville SW 421HO 1967 Bonneville SW 400 1969 GP 428 4spd 1970 GTO 400 4spd 1970 Bonneville SW 455 1971 GP 400 4spd 1971 Grandville Conv 455 1972 Catalina Conv 455 1972 Grandville Conv 455 |
#144
|
||||
|
||||
I'd be embarrassed to say how many hours i have in this, not taking into account welding shut the cut-out dad made between the snorkels.
|
#145
|
|||
|
|||
I wanted to say you have separated yourself from so many who try to do what you've done. Your patience for perfection, including the tough stuff, has resulted in a real beauty. Congratulations. I too have a '63 GP. I'm not going nearly as far as what you've done but I simply can't afford to go that route. Besides the time involved. Would it be ok to ask for a little advice from time to time? Mine had the same cameo, red interior, red oxide undercarriage, and red spatter trunk. It's a 56,000 mile car and I'm leaving the interior mostly as is but had taken the car down to metal, aircraft stripper, 80 grit, metal prep, metal work, and is currently in DP with the front clip off. Cleaned undercarriage, reprimed, and repainted rear end, backing plates, suspension etc. anyway would like to progress further as weather permits. Thanks for sharing your project- Adam
|
Reply |
|
|