[klunker]

I decided to part out a 65 Convertible that I have,
The frame is shot, as is the floor boards, trunk floor.
I feel it isn't worth the work to try to fix it, worth more as parts I feel.
So I am parting it out.
All the convertible stuff is there.
I would be particularly interested in anybody that wants to buy all the convertible stuff, great to use to convert a hardtop into a convertible.
Let me know what your looking for and I'll advise price.

[Goatboyjohnny]

What shape are the doors in, and how much?

[Fill Zerbe]

Are the front inner wheel wells in good shape? And how much? Post some pictures

[bigpop]

Does it still have a radio? If so,which one and it's condition? Also,the metal strip,behind the back seat,that holds the Velcro rubber piece,to the matching Velcro on the front of the boot? thanks Larry Banks

[ryan389]

Do you have a picture of the whole car?
THANKS

[klunker]

1) the Doors, They are in rough shape, the car was given a poor repaint many years ago, rust repair consisited of filling rusted areas with bondo, some metal welded in. So its hard to say how bad they are. But I can tell you this, the botton sill of the door where the weatherseal gets attached to has some rust thru areas. Not real bad. However the drivers side rear lower corner has rust thru and has been bondo'd,. The pass side, the rear edge of the door has had a replacement metal welded oin and the bondo has fallen out, its rusted frfrom the door handle on down, about 2-3 inches wide.
If it was me using the doors I would taer into them and see how bad they are. If your willing to spend $25 for each door (shell only, completely stripped of all other parts) and spend your time fixing rust then this might be for you.Or you could continue looking for nicer doors and pay more, its up to you.
Thanks


2)No front inner wheel wells

3) No radio, No rear seat

4) I do not have a picture of the entire car, what are you interested in seeing?

I am leaving Tuesday thru Friday night on Business, won't be able to answer any questions till saturday.
Thanks

[pontiac poncho]

I need the back seat.
Thanks,

[Leftyarmstrong]

Any a/c stuff?

[klunker]

1) Seats are already sold

2) No A/C stuff

3) Bigpop, Yes I d have the metal strip that holds the velcor strip, It was in the trunk, did see it., $20.00 plus shipping.

Thanks

[unclescratch]

I am interested in the frame rails that were probably reinforced because of it being a ragtop. This would have been along the rocker panels. Could you offer me photos so that I can reinforce my (hardtop) frame the same way? Thanks. djtech65@hotmail.com

[baron_]

I could use the driver's side stainless atop the door
The drip rail or whatever
Maybe the pieces on both sides as well, depending on prices


All the stainless there?
(or, any?)
I forget what models got all the stainless, and which ones didn't

[Leftyarmstrong]

Posi diff?

[colonial83]

I am in need of one 14 x 6 plain steel rim with a 4 1/2 inch backspace. Do you have any stock rims for sale?
Thanks

[67WhiteGoat]

Need front fenders, what kind of shape are they in.