FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
65-70 Big car tubular front control arms.
Gauging interest for my chassis guy. He is going to make a set of upper and lower control arms for my 70 and make a jig to make sets to sell. Just seeing if anyone else would be interested in having a set made. Can be made out of mild steel or chromoly tubing. Price would be comparable to other sets by different companys for different chassis.
|
#2
|
||||
|
||||
If the prices is reasonable and the parts are good, I would be in for a set or two. For sure upper control arms if there was about 2-3 degrees of positive caster built into them and set up for a common ball joint.
__________________
Brad Hansen 65 Cat Ventura, 66 Cat Vert, 63 GP |
#3
|
||||
|
||||
Very interested. I already use RARE rear tubular system and love it
__________________
1970 GTO Convertible 455 Ram Air M-21, Atoll/Blue/Black, Hood Tach, 3:31 12-Bolt Posi, A/C, Console 1966 Grand Prix 421 Tripower 4spd, Marina Turquoise/Turquoise, a/c, console, posi, reverb. pa, pb, ps, remote mirror, mats 2010 Dodge Challenger R/T Classic, 6spd Hemi, Detonator Yellow, black stripe, black leather |
#4
|
|||
|
|||
I’m going to pull a set off a parts car to give to him to make the first set. I will post pictures and prices after he is done with them.
Sent from my iPhone using Tapatalk |
#5
|
||||
|
||||
doing an alignment on these cars, it's tough to even get 1 degree of positive caster. With the radial tires, it would be nice to get to 4 degrees. If they are just stock control arm specs, I would have no interest.
__________________
Brad Hansen 65 Cat Ventura, 66 Cat Vert, 63 GP |
#6
|
|||
|
|||
Also interested, but not for just a stock geometry arm. Per 63gpman, there is a need for better alignment setting range than stock. I am/was planning to build build my own for my two '67s, but if these are appropriate, they would save me the time.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
Reply |
Thread Tools | |
Display Modes | |
|
|