FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Timing table
Any one have any opinions in this timing table I made for my 2nd gen?
Engine 462 72cc 345cfm edelbrock round ports Single plane MPFI intake 1200 cfm throttle body 260/283 @0.050 .648 lift 107 lobe separation solid roller |
#2
|
||||
|
||||
Attached pics are not readable, they are too small.
__________________
2023 Best ET Slip 60’ 1.224 330 3.186 1/8 4.784 MPH 152.07 1000 6.175 ET 7.347 MPH 189.92 Weight 3650 YouTube Channel --> https://www.youtube.com/channel/UC21...rWwgFdfTRqShGQ FaceBook Group --> https://www.facebook.com/groups/220092308823847/ |
#3
|
||||
|
||||
Not an EFI experienced, but it looks darn similar to the EFI color-grid table we used on a 600LB drone.
My opinion here is we found the 3000-6500 RPM mix and Time were greatly affected by Fuel Pressure vs Load@RPM. So, start with a proven fuel system for known suitable PSI , then the table will have some confidence. You probably can guess well on the Timing. Otherwise...i dunno nothin |
#4
|
||||
|
||||
How do I make the pictures larger. They are large on my computer but when uploaded they seen to be compressed
|
#5
|
||||
|
||||
Quote:
Host on Imgur. |
Reply |
|
|