About Us

Blackcat · 10-01-2003, 01:35 AM

Here I am!
Putting in the pipes!

Um, Scott from Summit?
I need a New hat!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-01-2003, 12:13 PM

One needs the best tools for doing work!
These High dollar water buckets cost thousands!
Worked like a champ in holding up the mufflers and pipes for us!
Yep! that's me installing the next set of pipes.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

[This message was edited by Blackcat on October 01, 2003 at 06:16 PM.]

Blackcat · 10-01-2003, 12:21 PM

Here is the X-pipe! Note the high dollar stand!
For some reason all my stands were in use! All 8 of them!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-01-2003, 12:26 PM

Working on the car is not without hazzards!
One can be in serious trouble at any Moment!
It was sudden and scary!!!!

(Roomates new pet is a real killer and loves to attack you under cars!)

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

NMcCoy · 10-01-2003, 05:37 PM

I think I'm not alone when I ask, what about the big
Pontiacs? My 66 Catalina would sure like some of those.

- Nelson

bonneville Joe · 10-01-2003, 06:36 PM

I think were gonna be OK man...

_____________________________
Foolproof and Sucka free since 1979.

Blackcat · 10-01-2003, 08:41 PM

That's a point of view!

My friend helping with the other project was attacked constantly!

It's hard to work with such a savage animal attacking you!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:27 AM

Here is my good car friend Ken!
He's attaching the head pipes.
Note that there are some extra legs in the Pix!
Puppy power? I think that he was getting some hair samples!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:32 AM

Here is Ken holding the extention to the X-pipe up to the head pipe.
Seems to be slightly long.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:40 AM

Here is the drivers side dummied up!
Remember that priceless Exhaust stand?
Works real well!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:49 AM

Oh,
Here is the restrictive original factory exhaust!
Um, It kind of fell off of the car?

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:59 AM

Here are the Pipes that Ccass has been talking about!
Both sides! After the test fiting of the head pipes I marked them for cutting. The line is very visible in the pix.
Quality workmenship on the pipes!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 01:05 AM

Here is my friend Ken cutting the pipes the old fashioned way! I didn't want to have sparks and hot metal flying on my 63 GP located on the other side of the garage.

Ken owns one of the best light blue Superbirds in the country! I really thank him for the help over the years!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

[This message was edited by Blackcat on October 02, 2003 at 02:57 PM.]

Blackcat · 10-02-2003, 12:00 PM

Here is the finished Job! Waiting on the final clamps.
A good view of the X-Pipe!

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:06 PM

Here is a view of the Passengers head pipe.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:10 PM

Here is another view for you'll to check.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:16 PM

Here is the drivers side. Note the clearances.
You do have some adjustment.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Blackcat · 10-02-2003, 12:18 PM

Here is another view!
Again note the clearences.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Brent67CAT · 10-02-2003, 09:30 PM

I'm new to Pontiacs, My New car is a 1967 Catalina 4DR HT, with a 400 2bbl with 143 heads and stock single exhaust. I was wondering after looking at the great set-up pictured in this post, if it would fit my Catalina it has a TH 400 auto column shift. Could you please tell me about the fit and cost of such a set-up. I live in Philadelphia and would be able to pick up the system or bring it to you for the results.
Thank You

Brent

Blackcat · 10-02-2003, 09:44 PM

Go to the main page and click on the Exhaust link and check the applications.
You can always call PY and ask.

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!

Menu

About Us