FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Rebuilding my entire front end after finding this: http://forums.performanceyears.com/g...11&m=354107677
While taking everything apart I found the stabilizer bar end link holes in my lower control arms ovalled out. Is this common and can they be repaired, or should they be replaced? None of the sources I've found have lower control arms for a '70, just 67-69 and 77-92. Why does no one sell these for 70-76? |
#2
|
||||
|
||||
Rebuilding my entire front end after finding this: http://forums.performanceyears.com/g...11&m=354107677
While taking everything apart I found the stabilizer bar end link holes in my lower control arms ovalled out. Is this common and can they be repaired, or should they be replaced? None of the sources I've found have lower control arms for a '70, just 67-69 and 77-92. Why does no one sell these for 70-76? |
#3
|
||||
|
||||
Its very common. Just weld the hole and re drill it round again. No need to junk it for a new one.
|
#4
|
||||
|
||||
Thanks Dennis. I was hoping they were repairable.
|
Reply |
|
|