#1  
Old 02-13-2020, 12:22 AM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Concord, CA
Posts: 2,003
Default Legendary vs. PUI Seat Covers and Door Panels

Swapping out my old PUI door panels and seat covers with Legendary replacements. The door panels were from the mid '90s and the seat covers from 2004-ish, so I'm not sure how they compare to PUI quality today, but there's a noticeable difference between the two.

Door panels: the PUI units are much puffier and less rigid than the Legendary replacements. The Legendary units are more like I remember the originals.





Legendary panel installed:


Attached Thumbnails
Click image for larger version

Name:	IMG_8481.jpg
Views:	245
Size:	85.6 KB
ID:	531768   Click image for larger version

Name:	IMG_8482.jpg
Views:	242
Size:	65.4 KB
ID:	531769   Click image for larger version

Name:	IMG_9153.jpg
Views:	247
Size:	79.5 KB
ID:	531770   Click image for larger version

Name:	IMG_8567.jpg
Views:	246
Size:	81.3 KB
ID:	531771  

__________________
Ken
'68 GTO - 400/TH400/3.55
  #2  
Old 02-13-2020, 12:26 AM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Concord, CA
Posts: 2,003
Default

The Legendary seat covers have deeper pleats, but still not quite as deep as I remember the OEM covers. Overall the vinyl and materials are thicker and much better quality than on the old covers. You can see where the PUI cover was starting to split, the construction on the Legendary is much more robust in that area so I don't anticipate that happening with these.


PUI cover - notice that lack of depth in the pleats.


PUI on the bottom, Legendary on the top


The PUI covers were tearing near the back corner:


Legendary covers look more robust in that area with thicker padding on the side.



Attached Thumbnails
Click image for larger version

Name:	IMG_9251.jpg
Views:	240
Size:	56.9 KB
ID:	531772   Click image for larger version

Name:	IMG_9257.jpg
Views:	241
Size:	89.2 KB
ID:	531773   Click image for larger version

Name:	IMG_9255.jpg
Views:	241
Size:	37.1 KB
ID:	531774   Click image for larger version

Name:	IMG_9256.jpg
Views:	244
Size:	107.2 KB
ID:	531775   Click image for larger version

Name:	IMG_9258.jpg
Views:	238
Size:	119.2 KB
ID:	531776  


__________________
Ken
'68 GTO - 400/TH400/3.55
  #3  
Old 02-13-2020, 12:28 AM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Concord, CA
Posts: 2,003
Default

Will post some more pics once I get them installed, but they look like a nice upgrade so far.



Attached Thumbnails
Click image for larger version

Name:	IMG_9252.jpg
Views:	239
Size:	97.7 KB
ID:	531777   Click image for larger version

Name:	IMG_9259.jpg
Views:	238
Size:	85.6 KB
ID:	531778  

__________________
Ken
'68 GTO - 400/TH400/3.55
  #4  
Old 02-13-2020, 06:10 AM
dataway's Avatar
dataway dataway is offline
Ultimate Warrior
 
Join Date: Jan 2012
Location: Saratoga NY
Posts: 5,649
Default

Very nice upgrade I'd say. And you just decided me on what brand I'll be getting. Legendary looks WAY better.

  #5  
Old 02-13-2020, 01:01 PM
OG68's Avatar
OG68 OG68 is offline
Senior Chief
 
Join Date: Dec 2011
Location: Chula Vista, CA
Posts: 346
Default

I inherited "Distinction" (from OPGI) interior panels and covers when I bought my car back. I have already installed the bucket seat covers and definitely don't care for them. I have a Legendary bench seat cover on my ELCo and the difference is night and day between the two. Legendary will be going into the Goat.

__________________
Ed

1968 GTO
1970 El Camino SS
2006 Silverado
2007 SRX

  #6  
Old 02-13-2020, 01:25 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 14,047
Default

Legendary here too...



Attached Thumbnails
Click image for larger version

Name:	wheel 2.jpg
Views:	194
Size:	80.9 KB
ID:	531815   Click image for larger version

Name:	IMG_0262.jpg
Views:	197
Size:	66.8 KB
ID:	531818  

__________________
Greg Reid
Palmetto, Georgia

  #7  
Old 02-13-2020, 01:43 PM
dataway's Avatar
dataway dataway is offline
Ultimate Warrior
 
Join Date: Jan 2012
Location: Saratoga NY
Posts: 5,649
Default

That looks absolutely OEM ... maybe better.

  #8  
Old 02-13-2020, 05:58 PM
OG68's Avatar
OG68 OG68 is offline
Senior Chief
 
Join Date: Dec 2011
Location: Chula Vista, CA
Posts: 346
Default

Greg,
Did you buy the complete kit for your door panels or did you use the original upper frame?

__________________
Ed

1968 GTO
1970 El Camino SS
2006 Silverado
2007 SRX

  #9  
Old 02-13-2020, 08:50 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 14,047
Default

I used my original uppers. They were surface rusted but completely solid and cleaned up pretty well with some phosphoric acid. They are attached by a method most won't be able to duplicate. Maybe you guys have seen it but there are square shaped holes punched through the metal upper and the four points...think the four spaces in an 'X' are imbedded into the heavy cardboard panel.
For some reason, I can't attach a pic right now. If I could, I wouldn't have been so wordy.
Anyway, I started looking for some type of rivet that would work and ran across some two piece rivets that are usually used in leatherwork. Like the rivets you see in a belt where it folds over the buckle, purse strap, etc. All you need is a drill to make a row of new holes, a small hammer and a solid base for an anvil.

__________________
Greg Reid
Palmetto, Georgia

The Following User Says Thank You to Greg Reid For This Useful Post:
  #10  
Old 02-13-2020, 08:56 PM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Concord, CA
Posts: 2,003
Default

I reused my uppers with the PUI panels and used short pop rivets to attach the cards. I bought pre-assembled panels from Legendary figuring they had the proper machinery and materials to do a better job than I would. Pricey for sure, I suppose that's the laziness tax.

__________________
Ken
'68 GTO - 400/TH400/3.55
  #11  
Old 02-14-2020, 04:05 AM
dataway's Avatar
dataway dataway is offline
Ultimate Warrior
 
Join Date: Jan 2012
Location: Saratoga NY
Posts: 5,649
Default

I'm up in the air about my door panels, The OEM pieces look pretty good, a bit of mildew, but are solid. I kinda like that old car smell

  #12  
Old 02-14-2020, 10:51 AM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 14,047
Default

If you like them I see no reason to change them. I only dyed my rear seat cover because it was in good shape. The rest I replaced.

Sent from my moto g(6) play using Tapatalk

__________________
Greg Reid
Palmetto, Georgia

  #13  
Old 02-14-2020, 11:23 AM
OG68's Avatar
OG68 OG68 is offline
Senior Chief
 
Join Date: Dec 2011
Location: Chula Vista, CA
Posts: 346
Default

Unfortunately my panels were all baked in the California sun. Thanks Greg for the ideas. I have a spare set of panels, maybe I'll practice with the Distinctive Industries set and see how it looks. If I fubar it I'll buy the preassembled.

__________________
Ed

1968 GTO
1970 El Camino SS
2006 Silverado
2007 SRX

  #14  
Old 02-14-2020, 11:30 AM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Concord, CA
Posts: 2,003
Default

Greg- how does your original rear seat cover compare to the Legendary covers in the front? Specifically curious how the pleats compare. My memory is of the pleats being more squared and a little deeper, but I could be wrong. That memory comes from spending hours with a toothbrush trying to clean the seats when I got the car

__________________
Ken
'68 GTO - 400/TH400/3.55
  #15  
Old 02-14-2020, 07:29 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 14,047
Default

I think they match perfectly in pattern. Also, the SEM dye matched the new Legendary stuff absolutely spot on. Had to get it from TCP Global as SEM told me that their codes didn't go back that far.
I'll try to post pics again later tonight.


Sent from my moto g(6) play using Tapatalk

__________________
Greg Reid
Palmetto, Georgia

  #16  
Old 02-14-2020, 10:03 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 14,047
Default

Try this again...
Ok, all of this except the console cover came with my car and I dyed it all. The cover was new and black. SEM makes a good product. It has lasted for 8 years with no peeling or chipping.



The 'rivets' I used..





Attached Thumbnails
Click image for larger version

Name:	IMG_0354.jpg
Views:	90
Size:	67.2 KB
ID:	531952   Click image for larger version

Name:	IMG_0258 (1).jpg
Views:	90
Size:	49.0 KB
ID:	531953   Click image for larger version

Name:	IMG_0258.jpg
Views:	91
Size:	52.7 KB
ID:	531954   Click image for larger version

Name:	IMG_0247.jpg
Views:	88
Size:	66.1 KB
ID:	531955  

__________________
Greg Reid
Palmetto, Georgia


Last edited by Greg Reid; 02-14-2020 at 10:16 PM.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:51 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 

Cold Case Radiators

Cold Case Radiators is a Max Performance company that produces high end aluminum performance radiators at a price point that won't break the bank. Polished and stamped tanks. 2 rows of 1" tubes. Lifetime Warranty.

GTOG8TA.com

GTOG8TA.com is a Max Performance company that manufacturers parts for the 04-06 GTO, 08-09 G8, and 93-02 Firebird/Trans Am platforms.

Copyright © 2017