FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Stock Push Rods for pontiac
Would rather see these go to a member.
I'm not sure $10 is too much? Stock length less than 7000 miles on them, straight when rolled on glass maybe someone has a budget build and needs them?
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane |
#2
|
||||
|
||||
What motor did they come out of and how long are they?
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#3
|
||||
|
||||
They came out of my 406 pontiac. They were used with roller aluminium rockers it's whole life. they were right around 9.150 .
I'm in canada and have a push rod box that I could wrap up and get an estimate to deliver down to you. Maybe more effort then it's worth?
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane |
Reply |
Thread Tools | |
Display Modes | |
|
|