FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Motor mount parts help, please
I'm swapping an ohc6 in my x-body Olds Omega, which uses the 1st gen f-body subframe.
https://forums.maxperformanceinc.com...d.php?t=837283 now I'm struggling with finding the correct motor mount parts. Would need insulator and frame bracket. The picture in the Pontiac Service Manual does show for the 6 Cyl engine the Tempest, I think. So I'm lost a bit and appreciate any help! Is this a correct f-body motor mount for an ohc6 engine? https://www.ebay.at/itm/Pontiac-Fire...s/303133113084 Any other source or used parts from forum members are highly welcome! |
#2
|
||||
|
||||
There are two types of mounts and brackets for our OHC's.
Tempest and Firebird. The Tempest mounts use a long connecting through bolt to secure the mount to the frame bracket while the Firebird mounts have a center bolt provision in the mount and the primary frame brackets are a taller "stand" type design with supporting brackets. The first 2 images below are Tempest parts and the last are Firebird. Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 02-26-2024 at 07:14 AM. |
#3
|
|||
|
|||
Thank you Jeff.
What I assumed you confirmed, that my service manual just shows the Tempest version! Someone hast a set of this parts left for me, please? Shipping to Austria or Humble, TX will be required. Thank you all. |
#4
|
||||
|
||||
Try placing a wanted ad in the "67-81 Firebird & TA Parts WANTED" further down the forum list.
__________________
65 Tempest, 400, TH400 86 Fiero SE 2.8 |
#5
|
|||
|
|||
very good advice! done
Thank you |
#6
|
|||
|
|||
If you still need the Firebird Frame mounts I have a set on Ebay:
eBay item number: 202901011424 Rick |
#7
|
|||
|
|||
👍 yes sir!
|
#8
|
|||
|
|||
Quote:
Thank you for the ebay number! I was successful. Kind regards Karl |
Reply |
|
|