FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Torker 2 with Dominator flange
This is an old Torker 2 that was modified by Roy Kinslow many years ago, probably before the Victor came out. He ran it with #16 Dports.
He epoxied a Dominator flange on this manifold. Port sizes are 1 1/8" x 2 1/4". Not sure if ported. Not sure if milled. Water crossover is still attached. I never ran this manifold. It has been sitting on my shelf for years. Height is about 5 1/2", which should be good for hood clearance Part # 5056 $200 + Shipping I will be at the BOP race at Atco on 4/27. I can deliver.
__________________
1978 Pontiac Grand LeMans.......out next year Previous - 2001 Jerry Haas-built P/S Grand Am - former WJ car, Hoffman Racing 535" IA2, Tiger Heads/Intake, Single Dominator, PG Best ET: 7.776 @ 175.94, 1.096 60', 2375 lbs. |
|
|