FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
New Best
I finally got the suspension working with the 4.56 gear. I had a new best 60' @1.55 and a best ET @7.15, MPH was a little over 95. It was fun again to be able to dial the car in and go rounds. Looking forward to this year and hoping to do well. Hope everyone is getting out and laying down some good times.
|
#2
|
||||
|
||||
Cool! Nice job. Kick some butt this year.
__________________
Come take a ride http://www.youtube.com/watch?v=P7Y8Awfk2I0 2008, 2013, 2015, 2016, 2019 Central Il Dragway Mod track champion and 2015 IHRA Div 5 Mod champion |
#3
|
||||
|
||||
Well done man, have a great year.
|
#4
|
||||
|
||||
Job well done! Your combo please??
__________________
461 Stroker: 265/276 Comp Cam Solid roller . 340CFM E-Head Victor Intake 1050 Dom Carb. 390/430 9" Gears with a T400 trans 4200 converter. Street weight 3850. 1.49 60ft. 275/60/15 M/T DR 10.57 SO FAR |
#5
|
||||
|
||||
Congrats! I'm interested in your combo too. Tracks not open here yet...yesterday was sunny and 70 then had snow last night. I did take mine out for a drive the other night though.
__________________
'68 Firebird 463/pump gas/SD 325 E-heads/266-272 SR cam/1050 Dominator/3.73/ET Street Radials/1.37 60'/6.30@108.80/9.93@135.14 Hot Rod Drag Week finishing averages: 2014 - 11.12 @ 118.56 2015 - 10.84 @ 124.97 2016 - 10.56 @ 127.88 2017 - 10.29 @ 130.74 2018 - 10.29 @ 130.53 2019 - 10.16 @ 132.34 2021 - 10.09 @ 132.69 2022 - 10.13 @ 133.07 9.93 run - https://youtu.be/hII0_UlYM4U |
#6
|
|||
|
|||
Thanks for the nice comments. The car is a 1980 Grand Am, not sure on the wt. I haven't wieghed it in years, probably 3400 and change. The engine is a 467 with #62 heads. The cam is a Crower solid, 264-274 @.050 with around .600 lift with the 1.6 rockers, (small block Ford rockers). The intake is a Performer RPM, with an HP 1000 4150 carb. Fuel cell with Mallory 140 at the cell and a mechanical Carter competition pump, stock fuel lines. Stock HEI ignition. Cheap 3 tube headers with 12" extensions turned down. TH 350 trans with a 9" rear and 4.56 gears, nothing special just a good lil bracket car.
|
#7
|
||||
|
||||
Congrats and have fun.
Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#8
|
||||
|
||||
Nice job!! Always nice to get new bests!
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
#9
|
||||
|
||||
great job....hope your season goes well.
__________________
EHTTFMF! Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
#10
|
||||
|
||||
What gears were in it?
Leaves hard. |
#11
|
||||
|
||||
gear
Quote:
__________________
"Chief" Knucklehead 462 E Heads Solid Roller 91 Octane Nash Stick |
Reply |
|
|