[Rocky Rotella]

For anyone wanting to hear our 455's, click the links listed below. You may find it necessary to cut and paste.

Here is my fresh 462, Nunzi worked #197 HO heads, Nunzi 2043 camshaft, Jim Hand(and sons Tom and Joe) custom fabricated headers, 3" X pipe and Flowmaster 42585 muffler: http://www.geocities.com/rotella32/2043.wav

Here it is again easing into the throttle in 1st gear: http://www.geocities.com/rotella32/accel.wav

Here it is again, cold while backing out of the garage with open headers: http://www.geocities.com/rotella32/open-headers.wav

Here is the old set up with a 462, 4X heads, Nunzi 2042 camshaft, Ram Air exhaust manifolds and 3 chamber Flowmaster mufflers with true duals: http://www.geocities.com/rotella32/2042-2.wav

Same set-up as above: http://www.geocities.com/rotella32/2042.wav

Here's my dad's 1972 455 HO Trans Am, TH400 with Nunzi 2041 camshaft and stock exhaust routing with Flowmaster 42582 stock replacement transverse muffler. It's a short clip. http://www.geocities.com/rotella32/2041.wav

How's it sound???

[This message has been edited by Rocky Rotella (edited 10-26-2001).]

[Rocky Rotella]

For anyone wanting to hear our 455's, click the links listed below. You may find it necessary to cut and paste.

Here is my fresh 462, Nunzi worked #197 HO heads, Nunzi 2043 camshaft, Jim Hand(and sons Tom and Joe) custom fabricated headers, 3" X pipe and Flowmaster 42585 muffler: http://www.geocities.com/rotella32/2043.wav

Here it is again easing into the throttle in 1st gear: http://www.geocities.com/rotella32/accel.wav

Here it is again, cold while backing out of the garage with open headers: http://www.geocities.com/rotella32/open-headers.wav

Here is the old set up with a 462, 4X heads, Nunzi 2042 camshaft, Ram Air exhaust manifolds and 3 chamber Flowmaster mufflers with true duals: http://www.geocities.com/rotella32/2042-2.wav

Same set-up as above: http://www.geocities.com/rotella32/2042.wav

Here's my dad's 1972 455 HO Trans Am, TH400 with Nunzi 2041 camshaft and stock exhaust routing with Flowmaster 42582 stock replacement transverse muffler. It's a short clip. http://www.geocities.com/rotella32/2041.wav

How's it sound???

[This message has been edited by Rocky Rotella (edited 10-26-2001).]

[Rocky Rotella]

I changed the site, hopefully it'll keep up! Click the above links.

[This message has been edited by Rocky Rotella (edited 10-26-2001).]

[Ponti]

Nothing there!

[Rocky Rotella]

I guess if it get's too many people listening at once(I swear that it's 2 max!) then it'll come up with an error. If you get that error, email me at jrotella@home.com and I'll send them directly to you.

[Larry 67]

Yeah!!!!! Sounds sweet to my ears....NICE!

------------------
Cruise On!!!

[2FAST4U]

I think i found the problem. Try the links again. -Chris

"Here is my fresh 462, Nunzi worked #197 HO heads, Nunzi 2043 camshaft, Jim Hand(and sons Tom and Joe) custom fabricated headers, 3" X pipe and Flowmaster 42585 muffler: http://www.geocities.com/rotella31/2043.wav

Here it is again easing into the throttle in 1st gear: http://www.geocities.com/rotella31/accel.wav

Here it is again, cold while backing out of the garage with open headers: http://www.geocities.com/rotella31/open-headers.wav

Here is the old set up with a 462, 4X heads, Nunzi 2042 camshaft, Ram Air exhaust manifolds and 3 chamber Flowmaster mufflers with true duals: http://www.geocities.com/rotella31/2042-2.wav

Same set-up as above: http://www.geocities.com/rotella31/2042.wav

Here's my dad's 1972 455 HO Trans Am, TH400 with Nunzi 2041 camshaft and stock exhaust routing with Flowmaster 42582 stock replacement transverse muffler. It's a short clip. http://www.geocities.com/rotella31/2041.wav "

[2FAST4U]

**** ! Trick is cut each link out and then paste it directly onto the URL address bar and press enter. Sounds Cool as hell!! Chris

[A1Judge]

Rocky

That's pretty cool. I got to go do that on my fresh 70 Judge motor and put it up on my website... ANd here..

Don