FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
MSD Experts - Assistance Needed
Product = MSD Pontiac Pro Billet Distributor #8563
I disassembled this unit in the Spring with the intention of coating the internals to protect them from corrosion. Well, I need help with re-assembly. My memory fails me. I have most items sorted through, however, it's the placement of the smaller, silver washers in the grouping of two that I need help with. Where do those go? And the sealed bearing? Does that go to the top of the shaft? Pic attached. |
#2
|
||||
|
||||
Sealed bearing goes on the upper part of the shaft, not next to the gear.
The flat washers that fit over the shaft set the shaft clearance up and down movement. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#3
|
||||
|
||||
I have a spare one in the trailer. I will get it out and take a few pictures.
__________________
A new best of 9.135 @ 145.41 71 Lemans Sport. 72 Lemans Sport. |
#4
|
|||
|
|||
I have mine in my hand... its not so pretty. It was in the car just sitting for over 10 years and then pulled and sat in my garage for another 3-4 years... So its weathered. LOL
I made a quick video... Hope it helps. https://youtu.be/j6cUjw5a9NM Speed safe, nick
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#5
|
||||
|
||||
Thanks for the input and guidance everyone. Much appreciated.
|
Reply |
|
|