FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
66 posi
please dont laugh ,i know they're rarer than hens teeth but any one got one they would care to part with?
|
#2
|
||||
|
||||
Check with Brad @ Fabcraft. I think he may have some, gears too.
__________________
" Darksiders Rule "
|
#3
|
||||
|
||||
I have a complete posi rearend either 2:56 or 2:73 gears (can't remember) for $275
__________________
|
#4
|
||||
|
||||
He's got a GM 3.42 open set up already I believe.. A 2.73-2.93 Posi unit with a 12 bolt ring gear spacer should work to fit the 3.42.
__________________
63 Catalina coupe 467 cid budget drag car 11's 1/4 , 7.20 1/8th pump gas n/a 66 Star Chief Executive 57k mile 67 IH Scout project 2WD "Indian Scout" 69 Le Mans 2 dr HT 350 85k mile 15 sec 1/4 69 Firebird 400 Burgandy/Black 70 Olds Rallye 350 F85 4 speed 3.91's 70 Olds Cutlass Cruiser Red Wagon 350 101k miles 15 sec 1/4 12 sec w 455 74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8 2020 RAM 1500 SLT 4x4 5.7 A8 Hemi 2007 Hummer H3 3.7 liter turd |
#5
|
|||
|
|||
I have a 3.23 posi from a 65 Olds Starfire drum to drum (but housing is very rusty) that I'm asking $400 for. Your 3.42 gear will go right on this carrier.
|
#6
|
|||
|
|||
racer81x has gotten me taken care of i believe thank you anyway the starfire rear is a midsize like lemans rear end isnt it? if it is it wont work anyway
|
#7
|
|||
|
|||
No, the 425-powered 88 & 98 Oldsmobiles used the Pontiac 12-bolt (10 bolt cover) rear from 65-67. After 67 Olds made their own rear axles.
|
#8
|
||||
|
||||
I hope its not a 2.56 posi . wont work with the spacer.. two series left ...
__________________
63 Catalina coupe 467 cid budget drag car 11's 1/4 , 7.20 1/8th pump gas n/a 66 Star Chief Executive 57k mile 67 IH Scout project 2WD "Indian Scout" 69 Le Mans 2 dr HT 350 85k mile 15 sec 1/4 69 Firebird 400 Burgandy/Black 70 Olds Rallye 350 F85 4 speed 3.91's 70 Olds Cutlass Cruiser Red Wagon 350 101k miles 15 sec 1/4 12 sec w 455 74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8 2020 RAM 1500 SLT 4x4 5.7 A8 Hemi 2007 Hummer H3 3.7 liter turd |
#9
|
||||
|
||||
I have a complete (minus brake parts) out of a '67 Gp with 273's, can get some pics if interested.
Steve |
#10
|
|||
|
|||
I have a tight A106 dated 3:23 posi, drum to drum, but I'm on the other side of the country.
|
#11
|
|||
|
|||
I have a 3:42 posi from a 65 Grand Prix, asking $700. Call me for more info. 1-440-647-6686 in the morning..
|
#12
|
||||
|
||||
i have a 2.93 r&p and posi unit out of a 66 bonne.
__________________
69 GTO 11:66@114.17 all balls no bottle 406 d-port iron heads 3700lbs all steel |
Reply |
|
|