[gto65lvr]

I need a pic of the shifter and linkage for a ST-10 complete I am missing two of the rod to trans plates and dont know what the others look like for sure.

I also need to see how the linkage arms and those plates are mount to the trans so I can see the proper geometry.

[Held for Ransom]

I had to steal this photo of the shifter installed. Member AROWHED is/was selling this '79 unit. But, the 1-2 and 3-4 levers are installed upside-down. Here is some collected info.

Formula 400/455 and Trans Am shifter differences that occurred in 1974.
Shared parts;
Shifter body: stamped 3138 - Group 4.004, PN 405728
Shifter mount: stamped LU Made in Canada - Group 4.010, PN 3989410
Shifter lever (handle): stamped 7244 – Group 4.006, PN 479048
Lockout rod, upper: stamped ??? – Group 4.035, PN 3975624

Muncie parts
Stamped number;
5617: 1-2 Rod – Group 4.035, PN 3975617
5619: 3-4 Rod – Group 4.035, PN 3975619
5621: Reverse rod – Group 4.035, PN 3975621
B 5615 OUT: 1-2 and 3-4 Lever (arm) – Group 4.045, PN 3975615
W (or M) 5616, on one side, OUT (maybe) on other: Reverse lever (arm) – Group 4.045, PN 3975616
5618: Lockout rod, lower – Group 4.035, PN 3975618

Borg Warner ST-10 parts
Stamped number;
493450: 1-2 Rod – Group 4.035, PN 493450
451: 3-4 Rod – Group 4.035, PN 493451
unstamped: Reverse rod – Group 4.035, PN 493452 (or 356556)
OUT 6391: 1-2 and 3-4 Lever (arm) – Group 4.045, PN 486391
OUT 6392: Reverse lever (arm) – Group 4.045, PN 486392

[gto65lvr]

THANKS!