FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
455 Heads/intake
I need a set of heads and intake for a 73 455. Car was built first week of 73. Now that I think about it I could also use a real nice valley pan, oil pan, timing chain cover and a 4 spd carb. Thanks
|
#2
|
||||
|
||||
shot you a e-mail should have most of everything except the carb.
__________________
|
#3
|
||||
|
||||
Your 455 may have come with #4X heads, pressed in studs, 2.11" intake, 1.66" exhaust valves and 114 cc chambers. I think that I have a set of #66 heads from a 1971 455 that are screw in studs (better than pressed), the same 2.11" intake, larger 1.77" exhaust valves and the same 114 cc chambers. They are probably sitting on the shelf in my storage garage. If you are interested please copy me back and I'll verify.
|
#4
|
||||
|
||||
I have a set of 4X with the large chamber. Heads are in storage and I would have to get the date code if you're interested. Please pm me.
|
#5
|
||||
|
||||
Found them quickly; I have four sets of 4Xs with the date codes as follows:
L182 with 1H stamp (could not see other head but date codes should be very close) I273 with 1H " K263 with 4H " D253 with 4H " PM with your interests |
#6
|
||||
|
||||
The L18 and it's mate would work great. I'll see what Racer81 has since he's pretty close to me and if his dates won't work for heads I'll get back with you. Are they complete and how much do you need for them? Thanks
|
#7
|
||||
|
||||
Quote:
|
#8
|
||||
|
||||
A few pics of these...
|
Reply |
|
|