FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Pontiac - Boost Turbo, supercharged, Nitrous, EFI & other Power Adders discussed here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1/2" thick header flange
Anyone make 1/2" thick d port header flanges?
|
#2
|
|||
|
|||
I can get them lasered at work, will get you a price monday.
|
#3
|
|||
|
|||
flange
Thanks Alex
|
#4
|
|||
|
|||
PM sent
|
#5
|
||||
|
||||
Im interested in a set also.
|
#6
|
|||
|
|||
how about for a round port with 1 3/4" hole? Thanks.
|
#7
|
||||
|
||||
Stainless works made mine
__________________
www.MidwestStreetCars.com Butler Performance Quillen Motorsports Don Dial Race Cars |
#8
|
||||
|
||||
I am sure you could buy several sets for $20,000. You did good Justin.
If you can locate the material a lot of water jet companies can make the plates if they have a CAD file. Deal is getting that CAD file or tweaking an existing Pontiac one. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#9
|
|||
|
|||
The tweaking ain't no thang
Need to take out a mortgage for the full 4' x 10' sheet though. |
#10
|
|||
|
|||
Found someones leftover 1/2" mild steel plate at the local scrap yard. 24" x 12" of it very usable and rest(of what may have been 24" square) is full of various cuts.(I'll keep handy though) Very clean piece otherwise. Cost me $35.00 and was quite a heavy carry across the scrapyard.
|
#11
|
|||
|
|||
Scrap yards sure have a racket going Bruce. When I scrapped some steel a few weeks ago they were only paying 2 cents a pound. But when you want to buy some from them they charge market value.
Stainless here has been selling for $2.78 a pound from the metal supply. Bought some 3/8" stainless 3"x 36" and it was $85 for 2 lengths |
#12
|
||||
|
||||
Like this Tom
__________________
Working on going faster (and now staying dry at the same time !!) |
Reply |
|
|