FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Butler/Edelbrock D-port Heads & HR Cam/Lifters
I'm selling my Butler/Edelbrock, 87cc, 290 CFM, D-port heads and Comp HR cam and lifters. All have 1-2k miles on them. Cam specs below. Heads are set up for cam by Butler. Lifters are Comp HR also. I'm looking for $2,400 for the heads, $300 for the cam, and $350 for lifters. Might make a better deal for all of it. Buyer pay shipping.
Comp HD roller 3016S/13144S HR 112.0 +4.0 230/246 112 .541/.543 w/1.65 rockers |
#2
|
||||
|
||||
Sooo tempting. why are you selling? how old are the heads?
__________________
72 Luxury Lemans nicely optioned |
#3
|
||||
|
||||
The heads are a couple of years old and very low miles. My block cracked and I’m going with a different setup
|
#4
|
||||
|
||||
I made a mistake when I listed the cam specs.
Lobe lifts are .360 and .362 which would give .594 and .598 with 1.65 rockers. |
#5
|
|||
|
|||
I sent you a PM
Thanks Murf Sent from my iPhone using Tapatalk Pro |
#6
|
||||
|
||||
Replied...
|
#8
|
||||
|
||||
It is a Lee Atkinson grind. Can't find the simulation numbers he ran for some reason. Was about 550hp and crazy torque.
|
#9
|
||||
|
||||
Cam and lifters sold pending payment.
|
#10
|
||||
|
||||
Cam and lifters sold and paid for. Thanks!
|
#11
|
|||
|
|||
Heads
Very interested in the heads. Please contact me. New to this site. I think I sent you a PM?
|
#12
|
||||
|
||||
Couldn't find a PM from ya. Sent one to you.
|
#13
|
||||
|
||||
Heads are sold pending payment.
|
#14
|
||||
|
||||
Heads sold and paid for. Thanks!
|
|
|