FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
67 Dual gate
Good day all. Fresh Th400 column shift to his n hers conversion, with a new one piece floor. The hole in the floor seems to be in the wrong location. Based on the location of the console in relation of the firewall/trans tunnel,, the hole in the tunnel needs to go closer to the firewall. Does anyone have five of their original floors?
Thanks
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#2
|
||||
|
||||
gassman,
my 67 is was originally equipped with a Hurst Dual Gate. I took a picture of the location of the shifter for someone years ago, but you may find at least some help in the tape measure in relation to the firewall / floor seam. Hope it helps a bit.
__________________
Dave http://www.squidsfabshop.com/? (updated January, 2013, Pypes exhaust installation) |
#3
|
||||
|
||||
Thanks again Dave
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
Reply |
|
|