[twinturrbo406]

One of our CV-1 customers in Tennessee (Mike Moak) just got his new CV-1 top end installed on his 505 combo, the car previously had CNC’d HighPorts (380cfm) heads with a ported NorthWind manifold, Mike’s car is a 65’ GTO full steel car (except bumpers and hood) that he drives and is a simple pumpgas combination, the car would typically run in the 6.74-6.76 range in the 1/8th mile, so he was anxious to see what the car would run considering his new CV-1’s are as cast and the manifold also is unported … it ran a 6.45 right off the trailer 1st time out, needless to say he was very happy considering no tuning has been done yet, the only thing he changed was the heads and manifold, and yea pistons too because of the different valve angles but still flat tops, great job Mr. Mike 👍🏻

[twinturrbo406]

Here’s the time slip …

[Stan Weiss]

Originally Posted by twinturrbo406

One of our CV-1 customers in Tennessee (Mike Moak) just got his new CV-1 top end installed on his 505 combo, the car previously had CNC’d HighPorts (380cfm) heads with a ported NorthWind manifold, Mike’s car is a 65’ GTO full steel car (except bumpers and hood) that he drives and is a simple pumpgas combination, the car would typically run in the 6.74-6.76 range in the 1/8th mile, so he was anxious to see what the car would run considering his new CV-1’s are as cast and the manifold also is unported … it ran a 6.45 right off the trailer 1st time out, needless to say he was very happy considering no tuning has been done yet, the only thing he changed was the heads and manifold, and yea pistons too because of the different valve angles but still flat tops, great job Mr. Mike 👍🏻

Hi Bill,
It has been awhile. How are you doing? I would like to add this to the pump gas list.

http://www.magneticlynx.com/carfor/pont_gas.htm

Can you give me some more information about the car and engine? Do you know how much the car with driver weighs?

Thanks,
Stan

[PAUL K]

Nice!

[OCMDGTO]

REALLY cool car and always great to hear real world results. Pump gas engine with Pontiac blue is fantastic. Hopefully the owner updates as he tunes, heck of a first effort.

[twinturrbo406]

Originally Posted by Stan Weiss

Hi Bill,
It has been awhile. How are you doing? I would like to add this to the pump gas list.

http://www.magneticlynx.com/carfor/pont_gas.htm

Can you give me some more information about the car and engine? Do you know how much the car with driver weighs?

Thanks,
Stan

Hello Stan yeah it’s been awhile… I’m hanging in there but we’re still kicking 👍🏻 … here’s what Mike texted about the GTO …
“”” 65 GTO 3550 lbs ; 4:10 12 bolt ; old 28-10.5 bias slicks ; solid roller cam .727 intake .676 exhaust ; duration @.050 I-285 E-298 ; around 11-1 compression 93 octane pump gas ; 8" converter PTC ; reverse manual 400 tranny ; 505 MR1 ; 4.35 bore ; 4.25 crank ; 6.8 Crower Sportsman rods ;”””

[Stan Weiss]

Originally Posted by twinturrbo406

Hello Stan yeah it’s been awhile… I’m hanging in there but we’re still kicking 👍🏻 … here’s what Mike texted about the GTO …
“”” 65 GTO 3550 lbs ; 4:10 12 bolt ; old 28-10.5 bias slicks ; solid roller cam .727 intake .676 exhaust ; duration @.050 I-285 E-298 ; around 11-1 compression 93 octane pump gas ; 8" converter PTC ; reverse manual 400 tranny ; 505 MR1 ; 4.35 bore ; 4.25 crank ; 6.8 Crower Sportsman rods ;”””

Bill,
Thanks. I have added Mike to the list.

Stan

[blueghoast]

Thats bad ass for sure, Good job .

GT

[mysticmissle]

Originally Posted by Stan Weiss

Hi Bill,
It has been awhile. How are you doing? I would like to add this to the pump gas list.

http://www.magneticlynx.com/carfor/pont_gas.htm

Can you give me some more information about the car and engine? Do you know how much the car with driver weighs?

Thanks,
Stan

Nice job for Mike, he has been planning this swap for many years if i recall correctly.
Stan, does your spread sheet contain the date these results were achieved? It kind of lends context to your list. Cooper for example i think achieved his results over 10 years ago, Mine i think was all of 11-12 years ago. etc.

Its always great to see someone achieve their goals.

[slowbird]

Originally Posted by mysticmissle

Nice job for Mike, he has been planning this swap for many years if i recall correctly.
Stan, does your spread sheet contain the date these results were achieved? It kind of lends context to your list. Cooper for example i think achieved his results over 10 years ago, Mine i think was all of 11-12 years ago. etc.

Its always great to see someone achieve their goals.

2010 for my runs

[Stan Weiss]

Originally Posted by mysticmissle

Nice job for Mike, he has been planning this swap for many years if i recall correctly.
Stan, does your spread sheet contain the date these results were achieved? It kind of lends context to your list. Cooper for example i think achieved his results over 10 years ago, Mine i think was all of 11-12 years ago. etc.

Its always great to see someone achieve their goals.

Yes it does. I don't have any date for you. So around 2010? Also if I have it I also list the track / location for the run.

thanks,
Stan

[Stan Weiss]

Originally Posted by slowbird

2010 for my runs

Brian,
I have 2 different entries for you.

For the '73 Ventura I have 2008.

For your 9.05 I don't have a date or very much information at all.

For your Dad's '65 GTO I have 1995

thanks,
Stan

[mysticmissle]

Originally Posted by Stan Weiss

Yes it does. I don't have any date for you. So around 2010? Also if I have it I also list the track / location for the run.

thanks,
Stan

looks like New england dragway, oct 2009 for my ''accomplishment.''
nice job Mike!

[Gach]

Congrats Mike !

[twinturrbo406]

Originally Posted by OCMDGTO

REALLY cool car and always great to hear real world results. Pump gas engine with Pontiac blue is fantastic. Hopefully the owner updates as he tunes, heck of a first effort.

Mike loves Norwalk so I’m sure he’ll be at the next one 👍🏻 … he does a good job of keeping track of things …